USB2.0 Hi-Speed (480Mbps) and Audio Switches
FSA321 — USB2.0 Hi-Speed and Audio Switches with Negative Signal Capability
March 2013
FSA321 — USB2.0 Hi-Speed (480Mb...
Description
FSA321 — USB2.0 Hi-Speed and Audio Switches with Negative Signal Capability
March 2013
FSA321 — USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths
Features
Audio: 1.8 Typical On Resistance HS-USB: 8 Typical On Resistance HS-USB: 5pF Typical On Capacitance USB Path -3db Bandwidth: > 720MHz Negative Swing Capable Audio Channel Power-off Protection on Common D+/R, D-/L Ports Automatic USB Detection (Configurable) OVT on all I/O Ports Flow-Through Pin Out Eliminates PCB Vias Built-In Termination on Unselected Audio Paths
to Inhibit Audio Pop
Applications
MP3, Cell Phone, PDA, Digital Camera, and
Notebook
LCD Monitor, TV, and Set-Top Box
Description
The FSA321 is a Double-Pole, Double Throw (DPDT) multiplexer that combines a low-distortion audio and a USB2.0 High-Speed (HS) switch path. This configuration enables audio and USB data to share a common connector port. The architecture is designed to allow audio signals to swing below ground. This means a common USB and headphone jack can be used for personal media players and portable peripheral devices.
Since USB2.0 is an industry standard for shared datapath in portable devices, FSA321 can be configured for automatic VBUS detection. The FSA321 includes a power-off feature as well as over-voltage tolerance to minimize current consumption when VSW exceeds VCC.
Typical applications involve switching in portables and consumer appl...
Similar Datasheet