FSA839 — Low-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
January 2009
FSA839 — Low-Voltage, 0.8Ω SPDT Analog Switch with
Power-Off Isolation
Features
Power-Off Isolation (VCC=0V) 0.8Ω Maximum On Resistance (RON) for 4.5V VCC 0.25Ω Maximum RON Flatness for 4.5V VCC Broad VCC Operating Range: 1.65V to 5.5V Fast Turn-On and Turn-Off Times Control Input Switching Thresholds Independent of VCC Break-Before-Make Enable Circuitry 0.4mm WLCSP Packaging ESD Performance
Description
The FSA839 is a high-performance Single-Pole / Double-Throw (SPDT) analog switch for audio applications driven by low-voltage (1.8V) baseband processors or ASICs. The device features ultra-low RON of 0.8Ω (maximum) at 4.5V VCC and operates over the wide VCC range of 1.65V to 5.5V. The device is fabricated with sub-micron CMOS technology to achieve fast switching speeds and is designed for break-before-make operation. The FSA839 interfaces between the low-voltage ASIC and regular audio amplifiers and CODECs operating up to a 5.5V supply range. The control circuitry allows for 1.8V (typical) signals on the control pin (Sel).
-
HBM per JESD22-A114, I/O to GND: CDM per JESD22-C101: IEC61000-4-2 Contact / Air:
8kV 500V
IMPORTANT NOTE:
For additional performance information, please contact
[email protected].
8kV / 15kV
Applications Cellular Phone Portable Media Player PDA www.DataSheet4U.com Ordering Information
Part Number
FSA839UCX
Operating Top Mark Temperature Range
-40°C to +85°C N3
Eco Status
Green
Package
6-Ball WLCSP, 0.4mm Pitch
Packing Method
Tape and Reel
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Figure 1. Analog Symbol
© 2008 Fairchild Semiconductor Corporation FSA839 • Rev. 1.0.0 www.fairchildsemi.com
FSA839 — Low-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Marking Information
N 3 K K X Y Z
KK X Y Z = = = = Lot Run Code Year Work Week Assembly Site
Figure 2. Top Mark with Pin 1 Orientation
Ball Configuration
Figure 3. Pin Assignments (Bottom View)
Ball Definitions
Ball
A1 B1 C1
www.DataSheet4U.com
Name
B1 GND B0 VCC A Sel
Description
Data Port (Normally Open) Ground Data Ports (Normally Closed) Supply Voltage Common Data Port Control Input
C2 B2 A2
Truth Table
Control Input (Sel)
LOW HIGH
Function
B0 connected to A B1 connected to A
© 2008 Fairchild Semiconductor Corporation FSA839 • Rev. 1.0.0
www.fairchildsemi.com 2
FSA839 — Low-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol
VCC VSW VIN IIK ISW ISWPEAK PD TSTG TJ TL Supply Voltage Switch Voltage(1) Input Voltage(1) Input Diode Current Switch Current (Continuous) Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) Power Dissipation at 85°C Storage Temperature Range Maximum Junction Temperature Lead Temperature (Soldering, 10 Seconds) Human Body Model (JEDEC: JESD22-A114) ESD Charged Device Model (JEDEC: JESD22-C101) Machine Model (JEDEC: JESD22-A115) IEC6100-4-2 Discharge System Test Performed on Fairchild’s FSA859 Applications Testing Board Contact Air I/O to GND: A All Pins -65
Parameter
Min.
-0.5 -0.5 -0.5
Max.
6.5 VCC + 0.5 6.5 -50 200 400 180 +150 +150 +260 8 2 500 100 8 15
Unit
V V V mA mA mA mW °C °C °C kV V V kV
Note: 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not www.DataSheet4U.com recommend exceeding them or designing to Absolute Maximum Ratings. Symbol
VCC SEL VSW TA θJA Supply Voltage Control Input Voltage Switch Input Voltage Operating Temperature Thermal Resistance, Still Air
Parameter
Min.
1.65 0 0 -40
Max.
5.50 1.95 VCC +85 350
Unit
V V V °C °C/W
© 2008 Fairchild Semiconductor Corporation FSA839 • Rev. 1.0.0
www.fairchildsemi.com 3
FSA839 — Low-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
DC Electrical Characteristics
All typical values are at 25°C unless otherwise specified. Symbol
VIH VIL IIN
Parameter
Input Voltage High Input Voltage Low Control Input Leakage
VCC (V)
1.65 to 5.50 1.65 to 5.50
Conditions
TA=+25°C Min. Typ. Max.
TA=-40 to +85°C Min.
1.0 0.57
Max.
Unit
V V nA
1.95 to 5.50 VSel=0 5.50 3.60 2.70 1.95 5.50 3.60 2.70 1.95 5.50 3.60 A=1V, 4.5V B0 or B1=4.5, 1V A=1V, 3.0V B0 or B1=3.0, 1V A=0.