RM-1318

RM-1318 Reduced-miniature Reed Switch Form A, Center Contact, Release AT Configurable All dimensions in mm This reed switch is designed for applications where a size restriction is present, but higher load switching and current carrying capability is required. The blades have a good flexibility, for fast operation and good contact force, and can carry up to 1.5 A. The flattened leads are useful for orienting the internal blades to face one way while soldering, welding etc., for maximum in-group sensitivity. The three differential ranges available, cover a wide range of release specific applications. This reed switch is Lead (Pb) free and RoHS compliant. Formations Available Cropped SMD Welded Soldered Goal post L Formed Applications This reed switch is suitable for use in the following applications and many others: radio transmitters, instant water heaters, defective lamp detection, inclination sensors, pressure gauges, lake current measurement, fuel pumps, electric fishing reels, LEGO sensors... Electrical Sub code Operate Range Release Range Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Switching Voltage (max) www.DataSheet4U.comBreakdown Voltage (Min) Initial Contact Resistance (max) Insulation Resistance (min) Capacitance (min) Miscellaneous Operate Time (max) Bounce Time (max) Release Time (max) Resonance Frequency Operating Frequency Operating Temperature Test Coil Lead out plating Shock Resistance Vibration (10-2000Hz)...