AEH25B48N-6

Embedded Power for Business-Critical Continuity AEH25 Series 300 Watts Total Power: Input Voltage: # of Outputs: 300 Watts (12 V @ 25 A) 48 V Single Rev. 3.4.09_179 AEH25 Series  of 2 Special Features Electrical Specifications Input Input ra­nge: Input surge: Efficiency:  6-75 Vdc 3 100 V / 100 ms 93% @ 12 V (typical) < 2% 120 mV (typical) Up to 10% Vout 180 mV typical output deviation 25% step change 300 µs recovery time 115% nominal output 116% lo nominal 1500 Vdc TTL compatible (positive or negative enable logic control options) Industry Standard Half Brick baseplate design Low output ripple and noise High capacitive load limit on start-up Regulation to zero load Fixed requency switching Industry standard features: Input UVLO, OCP, OVP, OTP; Output Adjust, Differential Remote Sense, On/Off Enable Meets Basic Insulation EU directive 2002/95/EC compliant for RoHS Output Regulation: (Line, Load, Temp) Ripple and noise1: Remote sense: Transient response: Overvoltage protection: Overcurrent protection: Isolation voltage: Output voltage adjust range: ± 10% of nominal output Control Enable: Environmental Specifications Safety UL, cUL 60950-1 Recognized TUV EN60950-1 Licensed Operating temperature: Storage temperature: Overtemperature protection: MTBF: -40 °C to +100 °C baseplate -55 °C to +125 °C 110 °C typical > 1 mission hours Embedded Power for Business-Critical Continuity Ordering Information Input Voltage 36 V...