AIF80A300-L

Embedded Power for Business-Critical Continuity AIF Series 600 Watts Total Power: 600 Watts (12V@50Amps) Input Voltage: 300V # of Outputs: Single Rev. 05.23.07 AIF Series 1 of 2 RoHS Electrical Specifications Input Special Features 600W Continuous power at 100°C baseplate temperature 108W/in3 (6.6W/cm3) High efficiency - up to 90% Low output ripple and noise Positive and Negative enable function Excellent transient response OVP, OCP, V Adj control with ALPTM analog mode linear control, or through I2C bus with digital mode control. Paralleable with accurate current sharing EU Directive 2002/95/EC compliant for RoHS Input range Input surge Efficiency 250 - 420 VDC 450V / 100ms 90%@5.0V (Typical) 0.2% typical down to no load 0.2% typical 100mV typical (below 5V); 2% typical (5V and above) Up to 0.5V +/-20% for 5V and above; +10%/ -50% for below 5V 5% max for 3.3V and above, 150mV for 1.8V, deviation with 25% to 75% full load 250 μS (max) recovery 3% typical 115% Vo (nominal) 115% Io maximum Output Load Regulation Line Regulation Noise / Ripple Remote sense Output voltage adjust range Transient Response Current Share Accuracy Overvoltage Protection Current Limit Control Voltage Adjust 80 to 120% Vo linear programming for 12V, 15V, 24V, 48V 50% to 110% for 1.8V - 5.0V Enable TTL compatible (positive & negative enable options) Current Limit Adjust 20 to 100% Io linear programming or digital mode control Clock Input (external sync) 3.3 to 5.5Vp-p @ 800KHz ...