DatasheetsPDF.com

BXB75-48S12FLTJ Dataheets PDF



Part Number BXB75-48S12FLTJ
Manufacturers Emerson
Logo Emerson
Description DC-DC / Industry Standard Isolated Half Brick
Datasheet BXB75-48S12FLTJ DatasheetBXB75-48S12FLTJ Datasheet (PDF)

Embedded Power for Business-Critical Continuity BXB75 Series Single output Total Power: 50 - 75W Input Voltage: 36 - 75VDC # of Outputs: Single Rev.03.08.07 bxb75s 1 of 4 Special Features • Industry standard footprint MTBF >1.4 million hours (Bellcore 332) • Input voltage to ETS300-132-2 • Adjustable output voltage • No minimum load required • Separate case ground pin • 2:1 input range for battery powered applications • Undervoltage lockout (UVLO) • UL, VDE and CSA safety approvals • Availabl.

  BXB75-48S12FLTJ   BXB75-48S12FLTJ


Document
Embedded Power for Business-Critical Continuity BXB75 Series Single output Total Power: 50 - 75W Input Voltage: 36 - 75VDC # of Outputs: Single Rev.03.08.07 bxb75s 1 of 4 Special Features • Industry standard footprint MTBF >1.4 million hours (Bellcore 332) • Input voltage to ETS300-132-2 • Adjustable output voltage • No minimum load required • Separate case ground pin • 2:1 input range for battery powered applications • Undervoltage lockout (UVLO) • UL, VDE and CSA safety approvals • Available RoHS compliant • 2 year warranty The BXB75 Series are high power density dc-dc converters packaged in the industry standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when specifying for both new and replacement designs. Suitable for a wide range of applications in nearly any industry, the BXB75 was particularly designed with communication and distributed power applications in mind. Using Bellcore 332, the MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four threaded M3 inserts makes heatsink attachment and optimum thermal management easy. The BXB75 series is approved to IEC950 by UL, CSA and VDE. Safety VDE0805/EN60950/IEC950 File No. 10401-3336-0205 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.03.08.07 bxb75s 2 of 4 OUTPUT SPECIFICATIONS Voltage adjustability Set point accuracy Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise (5 Hz to 20 MHz) (See Note 1) Temperature coefficient Transient response (See Note 2) Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 4) Input reflected ripple (See Note 6) 48 Vin nominal No load Remote OFF 36-75 Vdc 100 mA max. 20 mA max. 3.5 A max. @ Io max. and Vin = 0-75 V 5 mA pk-pk Open collector ref to -input 1.2 Vdc max. Open circuit 3.3 V and 5 V 12 V At turn-on and turn-off Low line to high line Full load to min. load 60% to 110% ±1.0% ±0.05% ±0.10% 0% None None 75 mV pk-pk, 20 mV rms 100 mV pk-pk, 30 mV rms ±0.01%/°C ±2.0% max. deviation 170 μs recovery to within ±1.0% 0.5 Vdc transmission line drop compensation INPUT SPECIFICATIONS (continued) Undervoltage lockout Start-up time (See Note 8) EMC CHARACTERISTICS Conducted emissions (See Note 3) GENERAL SPECIFICATIONS Efficiency Isolation voltage Input/case Input/output Output/case Fixed See table 1500 Vdc 1500 Vdc 1500 Vdc 500 kHz typ. VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Aluminum baseplate with plastic case UL94V-0 110 g (3.88 oz) Bellcore 332 1,400,000 hours min. MIL-HDBK-217F 580,000 hours min. @ 40 °C, 100% full load Bellcore 1089 FCC part 15 EN55022, CISPR22 Level A Level A Level A 48 Vin: power up 48 Vin: power down Power up Remote ON/OFF 34 V 32.5 V 20 ms 20 ms Switching frequency Approvals and standards (See Note 5) Case material Material flammability Weight MTBF ENVIRONMENTAL SPECIFICATIONS Thermal performance Altitude Vibration Operating case temp. Non-operating Operating Non-operating 5-500 Hz -40 °C to +100 °C -55 °C to +125 °C 10,000 feet max. 40,000 feet max. 2.4 G rms (approx.) Active low remote ON/OFF (See Note 7) Logic compatibility ON OFF Embedded Power for Business-Critical Continuity Specifications Contd. Rev.03.08.07 bxb75s 3 of 4 OUTPUT POWER (MAX.) 50 W 75 W 75 W INPUT VOLTAGE 36-75 Vdc 36-75 Vdc 36-75 Vdc OVP 4.3 Vdc 6.5 Vdc 14.5 Vdc OUTPUT VOLTAGE 3.3 V 5V 12 V OUTPUT CURRENT (MIN.) 0A 0A 0A OUTPUT CURRENT (MAX.) 15 A 15 A 6.25 A EFFICIENCY (TYP.) 79% 83% 84% REGULATION LINE ±0.05% ±0.05% ±0.05% LOAD ±0.1% ±0.1% ±0.1% MODEL NUMBER (7, 9,10) BXB75-48S3V3FLTJ BXB75-48S05FLTJ BXB75-48S12FLTJ Notes Measured with 10 μF tantalum capacitor and 1 μF ceramic capacitor across output. 2 di/dt = 0.1 A/1 μs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 Units should be characterised within systems. External components required. 4 Input fusing is recommended based on surge current and maximum input current. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Simulated source impedance of 12 μH. 12 μH inductor in series with +Vin. 7 Active high remote on/off option is available (standard product is active low), designate with the suffix ‘FHT’ e.g. BXB75-48S05FHTJ. Consult factory for further details and options. 8 Start-up into resistive load. 9 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup.


BXB75-48S12FHTJ BXB75-48S12FLTJ BXB75-48S3V3FHTJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)