DatasheetsPDF.com

Isolated Industrial. CXE15-48S05J Datasheet

DatasheetsPDF.com

Isolated Industrial. CXE15-48S05J Datasheet






CXE15-48S05J Industrial. Datasheet pdf. Equivalent




CXE15-48S05J Industrial. Datasheet pdf. Equivalent





Part

CXE15-48S05J

Description

DC-DC / Low Power Isolated Industrial



Feature


CXE15 Series DC-DC CONVERTERS Single ou tput 15 W High Efficiency DC-DC Convert ers 1 • High efficiency topology, 87 % typical at 5 V • Industry standard footprint • Wide operating temperatur e, up to and exceeding 65 ˚C (natural convection) • 90% to 110% output trim • No minimum load • Overvoltage pr otection • Remote ON/OFF control • Available RoHS compliant The CXE15 .
Manufacture

Emerson

Datasheet
Download CXE15-48S05J Datasheet


Emerson CXE15-48S05J

CXE15-48S05J; is a new high efficiency open frame isol ated 15 Watt converter series in an ind ustry standard footprint. The CXE15 fea tures an input voltage range of 33 Vdc to 75 Vdc and are available in output v oltages of 5 V and 3.3 V. The output vo ltage on each model is adjustable from 90% to 110% of the nominal value. Typic al efficiencies for the models are 87% for the 5 V and 86.


Emerson CXE15-48S05J

% for the 3.3 V. The CXE15 series also h as a remote ON/OFF capability with acti ve high or active low logic. Overcurren t and overvoltage protection features a re included as standard. With full inte rnational safety approval including EN6 0950 and cUL1950, the CXE15 reduces com pliance costs and time to market. TÜV 2 YEAR WARRANTY All specifications ar e typical at nomina.


Emerson CXE15-48S05J

l input, full load at 25 °C unless othe rwise stated SPECIFICATIONS OUTPUT SP ECIFICATIONS Voltage adjustability Tota l error band Line regulation Load regul ation Minimum load Overshoot Undershoot Ripple and noise (See Note 1) Transien t response typ. deviation INPUT SPECIFI CATIONS Input voltage range Input curre nt Input current (max.) Input reflected ripple 48 Vin nomi.

Part

CXE15-48S05J

Description

DC-DC / Low Power Isolated Industrial



Feature


CXE15 Series DC-DC CONVERTERS Single ou tput 15 W High Efficiency DC-DC Convert ers 1 • High efficiency topology, 87 % typical at 5 V • Industry standard footprint • Wide operating temperatur e, up to and exceeding 65 ˚C (natural convection) • 90% to 110% output trim • No minimum load • Overvoltage pr otection • Remote ON/OFF control • Available RoHS compliant The CXE15 .
Manufacture

Emerson

Datasheet
Download CXE15-48S05J Datasheet




 CXE15-48S05J
CXE15 Series
Single output
DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters
High efficiency topology, 87% typical at 5 V
Industry standard footprint
Wide operating temperature, up to and exceeding 65 ˚C
(natural convection)
90% to 110% output trim
No minimum load
Overvoltage protection
Remote ON/OFF control
Available RoHS compliant
The CXE15 is a new high efficiency open frame isolated 15 Watt converter series
in an industry standard footprint. The CXE15 features an input voltage range of 33
Vdc to 75 Vdc and are available in output voltages of 5 V and 3.3 V. The output
voltage on each model is adjustable from 90% to 110% of the nominal value.
Typical efficiencies for the models are 87% for the 5 V and 86% for the 3.3 V. The
CXE15 series also has a remote ON/OFF capability with active high or active low
logic. Overcurrent and overvoltage protection features are included as standard.
With full international safety approval including EN60950 and cUL1950, the CXE15
reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
1
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
90% to 110%
Total error band
(See Note 11)
±3.5% max.
Line regulation
Low line to high line
0.1% max.
Load regulation
Full load to min. load
0.5% max.
Minimum load
0%
Overshoot
None
Undershoot
None
Ripple and noise
(See Note 1)
5 Hz to 20 MHz
70 mV pk-pk
20 mV rms
Transient response
typ. deviation
(See Note 2)
100 mV
400 µs recovery to
within total error band
INPUT SPECIFICATIONS
Input voltage range
48 Vin nominal
33-75 Vdc
Input current
No load
Remote OFF
35 mA max.
25 mA max.
Input current (max.)
(See Note 4)
0.55 A max. @ Io max.
and Vin = 33-75 Vdc
Input reflected ripple
(See Note 6)
5 mA (pk-pk) typ.
Active high remote ON/OFF
Logic compatibility
ON
OFF
(See Note 10)
Open collector ref to -input
Open circuit or >2 Vdc
<1.2 Vdc
Undervoltage lockout
Power up
Power down
33 V (typ.)
30 V (typ.)
Start-up time
(See Note 7)
Power up
Remote ON/OFF
1.5 ms (typ.)
2.5 ms (typ.)
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
Immunity:
ESD air
ESD contact
Radiated field enclosure
Conducted (dc power)
Conducted (signal)
Input transients
EN55022 (See Note 3)
EN55022 (See Note 3)
Level A
Level B
EN55022 (See Longform datasheet) Level B
EN61000-4-2 8 kV, 15 kV
EN61000-4-2 6 kV, 8 kV
EN61000-4-3 10 V/m
EN61000-4-6 10 V
EN61000-4-6 10 V
ETS 300 132-2, ETR 283
(See Note 8)
GENERAL SPECIFICATIONS
Efficiency
See table
Operational insulation Input/output
1500 Vdc
Switching frequency
Fixed
265 kHz typ.
Approvals and
standards
(See Note 5)
UL/cUL1950, EN60950
TÜV Rheinland
Material flammability
UL94V-0
Weight
12 g (0.42 oz)
MTBF
Representative model:
MIL-HDBK-217F
3,628,000 hours
48S05J @ 48 Vin, 40 °C,
100% load ground benign
BELLCORE 332
>1,500,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 9)
Operating ambient
temperature
Non-operating
-40 °C to +65 °C
-40 °C to +120 °C
File Name: cxe15s.pdf Rev: 01 Mar 2006




 CXE15-48S05J
CXE15 Series
Single output
DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
OUTPUT
POWER
(MAX.)
15 W
15 W
INPUT
VOLTAGE
33-75 Vdc
33-75 Vdc
OVP
4 Vdc
6 Vdc
OUTPUT
VOLTAGE
OUTPUT
CURRENT
(MIN.)
OUTPUT
CURRENT
(MAX.)
EFFICIENCY
(TYP.)
3.3 V 0 A 4.5 A
86%
5V 0A 3A
87%
REGULATION
LINE LOAD
MODEL
NUMBER (10,12)
0.1%
0.1%
0.5%
0.5%
CXE15-48S3V3-SJ
CXE15-48S05J
Notes
1 Measured as per recommended set-up. See Application Note 116 for
details.
2 di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
3 The CXE15 meets level A and level B conducted emissions only with
external components connected before the input pins to the converter.
See Application Note 116 for details.
4 Recommended input fusing is a 2 A HRC 200 V rated fuse.
5 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
6 Measured with external filter. See Application Note 116 for details.
7 Start-up into resistive load.
8 Signal line assumed < 3 m in length.
9 Operating ambient temperatures are specified at natural convection.
Higher operating temperatures are possible with increased airflow. See
Application Note 116 for details.
10 Remote ON/OFF (pin 3) and Trim (pin 5) are currently available individually
or together. The CXE-48S05J model includes pins 1, 2, 4, and 6. The
CXE15-48S3V3-SJ features pin 3 with positive logic.
11 This parameter is calculated at worst case line, load, temperature and initial
settings.
12 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
PROTECTION
Short circuit
Overvoltage
TELECOM SPECIFICATION
Central office interface A
Continuous
Non-latching clamp
ETS300-132-2, input voltage
and current requirements
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
File Name: cxe15s.pdf Rev: 01 Mar 2006




 CXE15-48S05J
CXE15 Series
Single output
DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
3
TOP VIEW
1.000 (25.40)
Dimensions in Inches [mm]
2.000 (50.80)
SIDE VIEW
0.600 (15.24)
0.040 (1.02)
0.600 (15.24)
0.350 (8.89)
0.015 (0.38)
0.120 (3.05)
0.800 (20.32)
0.200 (5.08)
BOTTOM VIEW
0.300 (7.62)
0.10
(2.54)
0.800 (20.32)
4
2
5
1
36
0.600 (15.24)
0.400 (10.16)
0.400 (10.16)
Recommended Hole Pattern
0.100
(2.54)
0.200
(5.08)
0.800 (20.32)
36
Case Outline
0.200 (5.08)
1
.200(5.08) .560 (14.22) 5
2 .060 (1.52)
4
0.400 (10.16)
0.040 (1.016) 0.400 (10.16)
Standoff (4 places)
Plated Through Hole
0.052-0.06 (1.321-1.40) typical
PIN CONNECTIONS
PIN NUMBER
FEATURE
1 Vin -
2 Vin +
3 On/Off (See Note 10)
4 Vout +
5 Trim (See Note 10)
6 Vout -
International Safety Standard Approvals
UL/cUL 1950 3rd edition. File No. E135734
TÜV TÜV Rheinland. Certificate No. R2074133
File No. 10401-3336-0916
Datasheet © Artesyn Technologies® 2006
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items:  Application Note  Longform Data Sheet
www.artesyn.com
File Name: cxe15s.pdf Rev: 01 Mar 2006






Recommended third-party CXE15-48S05J Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)