DP4048N3M

Embedded Power for Business-Critical Continuity DP40 40 Watts Total Power: Input Voltage: # of Outputs: 40 Watts 90 - 264 VAC 127 - 300 VDC Single Rev. 9.23.09_75 DP40  of 2 Electrical Specifications Input Special Features Medical and ITE safeties Universal AC input Fully regulated output Overload and short circuit protection Constant voltage High efficiency High MTBF IEC320 AC input receptacle 3 pin (type C14) 2 pin (type C8) Built in EMI filter (CISPR 22 Class B) LED power good indicator Input power < 49 watts Complies with EN61000-3-2 Meets Energy Star 2.0 WEEE & CeC IV compliant CE Mark EMC & LVD Less than 300 mW No-Load power consumption Input ra­nge: Frequency: Inrush current: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 Vac (wide range) 127 - 300 Vdc 47 - 63 Hz < 50A @ 230 Vac, cold start @ 25 °C < 0.5 A rms @ 115 Vac; < 0.25 A @ 230 Vac 84% @ full load typical, @115 Vac FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 300 µA @ 50/60 Hz, 264 Vac input for 3 pin model 100 µA @ 50/60 Hz, 264 Vac input for 2 pin model 40 W 10 ms. typical at full load @ 115 Vac 20% - 45% above nominal output maximum Latching type, recycle AC to reset. Output short circuit protection auto recover Overload protected @ 110 - 160% above peak rating 1.2 m DC cable with 2.5mm I.D, 5.5 mm O.D center plug DC plug center +v DC plug outer -v Output Maximum Power (Po): Hold-up time: Overvoltage ...