DPS52-M

Embedded Power for Business-Critical Continuity DPS50-M 60 Watts Medical Total Power: Input Voltage: # of Outputs: 30 - 60 Watts 90 - 264 VAC 127 - 300 VDC Single Rev. 10.01.08_123 DPS50-M  of 2 RoHS Electrical Specifications Input Special Features Medical safety approvals CE Mark EMC & LVD Universal AC input Fully regulated output Overload and short circuit protection Internal remote sense to the output plug Constant voltage High efficiency High MTBF IEC320 AC receptacle, 3 pin (type C14) Built in EMI filter (CISPR 22 Class B) LED power good indicator Input power <74 watts Complies with EN61000-3-2 Meets Energy Star WEEE & CeC iV compliant Input ra­nge Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current 90-264 VAC (wide range) 127 - 300 VDC 47-440 Hz <60A @ 230 VAC, cold start @ 25C <2.0A rms @ 115 VAC; <1A @ 230 VAC 80% @ full load typical, @115VAC FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 275µA max. @ 50/60 Hz, 264 VAC input Output Maximum Power (Po) Hold-up time Overvoltage protection Overload protection Cable/connector 60W (DPS52, 30W) 10ms. typical at full load @ 115VAC 20% - 45% above nominal output maximum Latching type, recycle AC to reset. Output short circuit protection auto recover Overload protected @ 120 - 150% above maximum rating DC cable with 2.5mm center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: Storage temp...