AC-DC / Distributed Power Front-End 1U
Embedded Power for Business-Critical Continuity
DS1200
1200 Watts
Distributed Power System
Distributed Power Bulk Front...
Description
Embedded Power for Business-Critical Continuity
DS1200
1200 Watts
Distributed Power System
Distributed Power Bulk Front-End Total Output Power: 1200 Watts +3.3 Vdc Stand-by Output Wide Range Input Voltage: 90 - 264 Vac
Rev. 9.10.09_22 DS1200 of 4
Electrical Specifications
Special Features
Active power factor correction EN61000-3-2 harmonic compliance Active AC inrush control 1U X 2U form factor 21.71 W / in3 +12 Vdc Output +3.3 Vdc stand-by (5 V standby - consult factory) No minimum load required Hot plug operation N + 1 redundant Internal OR’ing fets Active current sharing (10 - 100% load) Built-in cooling fan (40 mm x 28 mm) I2C communication interface bus PMBus compliant EERPOM for FRU data Red/green bi-color LED status Internal fan speed control Fan Fail Tach Output Signal INTEL, SSI Std. logic timing INTEL, SSI Std. FRU data format Full digital control One year warranty
Input
Input range: Frequency: Inrush current: Efficiency: Conducted EMI: Radiated EMI: Power factor: Leakage current: Hold up time: 180 - 264 (1200 W) 90 - 264 (1000 W) 47-63 Hz, single phase AC 40 Apk maximum inrush current > 91% typical at high line 50% load FCC Subpart J EN55022 Class B FCC Subpart J EN55022 Class B 0.99 typical 1.40 mA @ 240 VAC 12 ms minimum +12 V @ 100 A (high line) +12 V @ 81.6 A (low line) +3.3 Vsb @ 6 A (5 V @ 4 A available) ±5% on +12V only using I2C +12 Vdc; +5% / -5% +3.3 Vsb; +5% / -5% +12 Vdc; latches off if overcurrent l...
Similar Datasheet