DS2000-3

Embedded Power for Business-Critical Continuity DS2000-3 2000 Watts 12 V Distributed Power System Distributed Power Bulk Front-End Total Output Power: 2000 Watts +12 Vdc main Output +3.3 Vdc Stand-by Output Wide Range Input voltage: 90 - 264 Vac Rev. 5.01.09_52 DS2000-3  of 4 Electrical Specifications Special Features Active power factor correction EN61000-3-2 harmonic compliance Active AC inrush control 1U X 3U form factor 26.14 W / in3 +12 Vdc output +3.3 Vdc Stand-By (5 V standby - consult factory) No minimum load required Hot plug operation N + 1 redundant Internal OR’ing fets Active current sharing (10 - 100% load) Built-in cooling fans (40 mm x 28 mm) I2C communication interface bus PM Bus compliant EERPOM for FRU data Red/Green bi-color LED status Internal fan speed control INTEL, SSI Std. logic timing INTEL, SSI Std. FRU data format One year warranty Input Input ra­nge 90-264 Vac (wide range) 90 - 264 1200 W load, nominal 100 Vac 180 - 264 2000 W load, nominal 200 Vac 47-63 Hz, single phase AC 55A maximum inrush current >89% typical at full load, high line FCC Subpart J EN55022 Class B FCC Subpart J EN55022 Class B 0.99 typical 1.40 mA @ 240 Vac 12 ms minimum +12 V @ 164.2 A 180 - 264 Vac +12 V @ 100 A 90 - 264 Vac +3.3 Vsb @ 9 A (5 V @ 5 A TBA) Factory Set, no pot adjustments +12 Vdc; ±5% +3.3 Vsb; ±5% +12 Vdc; latches off if overcurrent lasts over 1 second, otherwise it is auto recovery (See ordering info next page) ...