DatasheetsPDF.com

EXB100-48S3V3-RJ Dataheets PDF



Part Number EXB100-48S3V3-RJ
Manufacturers Emerson
Logo Emerson
Description DC-DC / Industry Standard Isolated Half Brick
Datasheet EXB100-48S3V3-RJ DatasheetEXB100-48S3V3-RJ Datasheet (PDF)

EXB100 Series DC-DC CONVERTERS • • • • • • • • Single output 100 W DC-DC Isolated Converters NEW Product 1 Ultra wide trim range, 60% to 110% (1.08 Vdc to 5.5 Vdc) High efficiency, 91.5% @ 5 Vdc, 90.5% @ 3.3 Vdc Basic insulation (input to output) Industry standard half-brick pin-out No minimum load Overvoltage and overtemperature protection Remote ON/OFF Available RoHS compliant The EXB100 series of 100 W single output isolated dc-dc converters are specially designed to meet the power needs .

  EXB100-48S3V3-RJ   EXB100-48S3V3-RJ


Document
EXB100 Series DC-DC CONVERTERS • • • • • • • • Single output 100 W DC-DC Isolated Converters NEW Product 1 Ultra wide trim range, 60% to 110% (1.08 Vdc to 5.5 Vdc) High efficiency, 91.5% @ 5 Vdc, 90.5% @ 3.3 Vdc Basic insulation (input to output) Industry standard half-brick pin-out No minimum load Overvoltage and overtemperature protection Remote ON/OFF Available RoHS compliant The EXB100 series of 100 W single output isolated dc-dc converters are specially designed to meet the power needs of low voltage silicon. Housed in an open-frame package with standard footprint, these latest generation converters offer efficiencies as high as 91.5% (typical on 5 V at 20 A). The series comprises two 48 V input models with 5 V and 3.3 V outputs. The 3.3 V model features a wide input range, trimmable output voltage and 30 A output (the 5 V model is limited to 20 A). Remote sense and remote ON/OFF facilities are included as standard, and the converters are comprehensively protected against overcurrent, overvoltage and overtemperature conditions. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Output setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (See Note 2) (See Note 1) Deviation At turn-on and turn-off Low line to high line Full load to min. load 60% to 110% 1.5% ±0.2% max. ±0.4% max. 3.0% 0% None None 100 mV pk-pk 50 mV rms 150 mV 300 µs recovery to within total error band EMC CHARACTERISTICS Conducted emissions Radiated emissions Immunity: ESD air ESD contact Radiated field enclosure Conducted (DC power) Conducted (signal) Input transients EN55022 (See Note 7) EN55022 (See Note 7) EN55022 (See Longform Datasheet) Level A Level B Level A EN61000-4-2 8 kV, 15 kV EN61000-4-2 6 kV, 8 kV EN61000-4-3 10 V/m EN61000-4-6 10 V EN61000-4-6 10 V (See Note 5) ETS 300 132-2, ETR 283 GENERAL SPECIFICATIONS Efficiency Basic insulation Switching frequency (Fixed) Approvals and standards (See Note 8) Input/output 5V 3.3 V See table 1500 Vdc 300 kHz typ. 220 kHz typ. TÜV Product Service UL/cUL60950 UL94V-0 45 g (1.59 oz) 1,034,000 hours MIL-HDBK-217F 100% load, ground benign 591,000 hours BELLCORE 332 INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Undervoltage lockout Start-up time (See Note 6) Power up Power down Power up Remote ON/OFF No load Remote OFF (See Note 3) (See Note 4) 36-75 Vdc 150 mA 20 mA 3.15 A max. @ Io max. and Vin = 36-75 Vdc 60 mA (pk-pk) (See Note 5) Open collector ref to -input >2 Vdc <1.2 Vdc 36 V 30 V 40 ms 35 ms Material flammability Weight MTBF Representative model: ENVIRONMENTAL SPECIFICATIONS Thermal performance Altitude derating (above sea level) Operating ambient temperature Non-operating 3,000 m 10,000 m -40 °C to +90 °C -40 °C to +125 °C 20% 50% File Name: exb100s.pdf Rev: 18 Apr 2006 EXB100 Series DC-DC CONVERTERS OUTPUT POWER (MAX.) 100 W 100 W Notes INPUT VOLTAGE 36-75 Vdc 36-75 Vdc OVP 6.0 Vdc 3.9 Vdc OUTPUT VOLTAGE 5V 3.3 V Single output 100 W DC-DC Isolated Converters NEW Product 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A 0A OUTPUT CURRENT (MAX.) 20 A 30 A EFFICIENCY (TYP.) 91.5% 90.5% REGULATION LINE ±0.2% ±0.2% LOAD ±0.4% ±0.4% MODEL NUMBER (10) EXB100-48S05J (9) EXB100-48S3V3-RJ PROTECTION Short circuit Overvoltage TELECOM SPECIFICATION Central office interface A ETS300-132-2 input voltage and current requirements Continuous Non-latching clamp Measured as per recommended set-up. See Application Note 129 for details. di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 Recommended input fusing is a 5 A HRC 200 V rated fuse. 4 Measured with external filter. See Application Note 129 for details. 5 Signal line assumed <3 m in length. 6 Start-up into resistive load. 7 The EXB100 meets levels A and B conducted emissions with external components. See Application Note 129 for details. 8 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 9 Negative remote ON/OFF option also available. Add suffix ‘-R’ to part number, for example EXB100-48S05-RJ. 10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 1 2 CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. Max open-frame converter height 0.394 (10.00) Max PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 9 FUNCTION -Vin No Pin Remote ON/OFF +Vin +Vout seating plane Ø0.040 ±0.002 (Ø1.02 ±.


EXB100-48S05J EXB100-48S3V3-RJ EXB100-48S3V3-RNJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)