DatasheetsPDF.com

End 1U. HPS35Q-NNR-000 Datasheet

DatasheetsPDF.com

End 1U. HPS35Q-NNR-000 Datasheet






HPS35Q-NNR-000 1U. Datasheet pdf. Equivalent




HPS35Q-NNR-000 1U. Datasheet pdf. Equivalent





Part

HPS35Q-NNR-000

Description

AC-DC / Distributed Power Front End 1U

Manufacture

Emerson

Datasheet
Download HPS35Q-NNR-000 Datasheet


Emerson HPS35Q-NNR-000

HPS35Q-NNR-000; Embedded Power for Business-Critical Con tinuity HPS35 Series 350 - 1400 Watts Total Power: Input Voltage: # of O utputs: 350 Watts per module 90-264 VAC Single and standby Rev. 3.4.09_13 3 HPS35 Series  of 4 Electrical Speci fications Input Input voltage: Frequenc y: Inrush current: Efficiency: 90-264 V AC typical 47-440 Hz 40 A peak typical @ 25 °C 80% typ @ .


Emerson HPS35Q-NNR-000

full load, 230 VAC 0.98 typical @ 115 VA C, full load AC ON -2 sec., Inhibit / E nable 160 ms CISPR 22, EN55022 Level B” CISPR 22, EN55022 Level “B” 2 0 ms minimum (independent of input VAC) 5 ms early warning minimum before outp uts lose regulation Meets EN61000-3-2 M eets EN60950 ±5% of nominal output vol tage ±3% 1% of Vout pk - pk (20 MHz ba ndwidth) 4% from 25% to 75% .


Emerson HPS35Q-NNR-000

load step To within 1% in <300 µsec 115 - 130% of rated output current Protect ed for continuous short circuit. Auto recovery. 120 - 140% AC Reset. Main and Aux disabled when internal temp exc eeds safe operating range Up to 0.5 V t otal drop Current share to within 10% o f total rated current on main output ± 5% of nominal Special Features • Act ive Power Factor Corre.



Part

HPS35Q-NNR-000

Description

AC-DC / Distributed Power Front End 1U

Manufacture

Emerson

Datasheet
Download HPS35Q-NNR-000 Datasheet




 HPS35Q-NNR-000
Embedded Power for
Business-Critical Continuity
HPS35 Series
350 - 1400 Watts
Total Power:
Input Voltage:
# of Outputs:
350 Watts
per module
90-264 VAC
Single and
standby
Special Features
• Active Power Factor Correction
• EN61000-3-2 compliant
• CISPR22, EN55022 Level-B
conducted/radiated EMI
• EN61000 immunity standards
• 5Vsb@2A
• Overvoltage protection (OVP)
• Overcurrent protection (OCP)
• Overtemperature protection
(OTP)
• AC OK signal and indicator LED
• DC OK signal and indicator LED
• Remote Inhibit
• Remote Sense on main output
• Hot Plug
• N+1 Redundant
• 2 year warranty
Safety
UL
CSA
TUV
CB
CE
UL60950-1, 1st Ed.
(April 1, 2003)
CSA C22.2 60950-1-03
EN60950-1:2001
(1st Ed.)
IEC60950-1,
1st Ed. (2001)
Mark (LVD)
Rev. 3.4.09_133
HPS35 Series
 of 4
Electrical Specifications
Input
Input voltage:
90-264 VAC typical
Frequency:
47-440 Hz
Inrush current:
40 A peak typical @ 25 °C
Efficiency:
80% typ @ full load, 230 VAC
Power factor:
0.98 typical @ 115 VAC, full load
Turn-on time:
AC ON -2 sec., Inhibit / Enable 160 ms
EMI filter standard:
CISPR 22, EN55022 Level “B”
Leakage current standard: <0.5 mA max @ 230 VAC @ 60Hz (per module)
Radiated EMI:
CISPR 22, EN55022 Level “B”
Holdup time:
20 ms minimum (independent of input VAC)
AC OK:
5 ms early warning minimum before outputs lose regulation
Harmonic distortion:
Meets EN61000-3-2
Isolation:
Meets EN60950
Output
Adjustability:
±5% of nominal output voltage
Overall regulation:
±3%
Ripple:
1% of Vout pk - pk (20 MHz bandwidth)
Dynamic response:
4% from 25% to 75% load step
Recovery time:
To within 1% in <300 µsec
Overcurrent protection: 115 - 130% of rated output current
Short circuit protection: Protected for continuous short circuit. Auto recovery.
Overvoltage protection: 120 - 140% AC Reset.
Reverse voltage protection: 100% of rated output voltage
Thermal protection:
Main and Aux disabled when internal temp exceeds
safe operating range
Remote sense:
Single wire parallel:
DC OK:
Up to 0.5 V total drop
Current share to within 10% of total rated current on
main output
±5% of nominal





 HPS35Q-NNR-000
Module Information
Environmental Specifications
Rev.3.4.09_133
HPS35 Series
 of 4
Operating temperature:­­ 0 ° to 50 °C ambient. Derate each output 2.5% per degree from 50 ° to 70 °C
Shock:
Operating: 4g, half sine, 22 ms minimum duration, all 6 faces
Non-operating: 30g, half since, 6 ms minimum duration, all 6 faces
Random Vibration:
Operating: 1g rms, 20 min/axis
Non-operating: 2.5g rms, 20 min/axis
Humidity:
95% non-condensing
Storage Temperature: -40 ° to +85 °C
Temperature coefficient: 0.04% per °C
Cooling
Internal DC fans
Ordering Information
HPS35L-NNR-000
12V
HPS35Q-NNR-000
24V
HPS35W-NNR-000
48V
Modules
Watts
350
Input Voltage
90-264
Module ID
HPS35
Code
Volt Output Amps
L 12.0 29.2
Q 24.0 14.6
W 48.0 7.3
Max. Size (H x W x L) 1.6” x 4.3” x 10.5”
Number per Rack 4
Unit Weight (lbs) 3.2
Pin Assignments
(All units in mm)
HPS35 Module
TOP SIDE 1-24
Top
PIN DESIGNATIONPin Description Pin Description
TOP 1 AC (L)
BOT1TO3M COMMON
PIN NO.
1
2
SIG2ANCA(LL)NAMBE LANKPINANO.
3BLANK AC (N) B
S1IGAN4CA(LL)NAVMEOUT
1B5LANK V OUT
PIN NO.
3
4
4AC (N)
BLANK
BLANK
C
D
1BA6LCA(NNK) V OUT
14
15
5
5GND GND E
1G7ND V OUT 16
6
7
8
65SWV RPTN SWP
F
H
7COMMON5V RTNJ
1+-S8SEENNSSEEV OUT
1C9OMMOVN OUT
17
18
19
9 8COMMONCOMMOK N 2C0OMMOBNLANK 20
10
11
COMMON
L
9COMMONCOMMOM N
COMMON
2C1OMMO+N 5
STANDB2221Y
12 1CO0MMONCOMMON N 2C2OMMOTNBA
23
13 1CO1MMONCOMMOP N 2C3OMMOFNAN MON 24
12 COMMON 24 I2C CLK
Bottom
1 2 P3in4 5 D6 e7sc8 ri9p10ti1o1 n12 13 P14 in15 16 D17 e18sc19 r2i0p2t1 i2o2 n23 24
A AC (L) P COMMONA B C D E F H J K L M N P R S T U V W X Y Z AA AB
B
TOP
CSIGNAL NAME
+12V D
+12V
+12V E
+12V F
+12V
+12V
H
BLANK J
K+5V STANDBY
TBD
FAN MON L
I2C CLK M
N
BLANK
R
BOTTOM
APCIN N(ON. ) SSIGNAL NAME
BLAR NK +12V T
S +12V
GNTD
+12V U
-SEUNSE +12V V
+SEWV NSE
+12V
+12V
W
COXMMONINHIBIT X
COZYMMONATBCDOK Y
COAMA MONDC OK Z
COAMB MONI2C DATAAA
COMMON AB
V OUT
V OUT
V OUT
V OUT
V OUT
V OUT
INHIBIT
TBA
AC OK
DC OK
I2C DATA
Unit Connector
Card Edge Connector with gold fingers double-sided 1.6mm FR-4 PCB
Mating connector:
EDAC 307-048-520-201 or
equivalent
Rating: 5A per contact





 HPS35Q-NNR-000
Rack Information
HPR1-00
482.6
22.0
Racks
Watts
1400 (fully populated)
Input Voltage
90-264
Module ID
HPS35
Rack ID
HPR1-00
Max. Size (H x W x L) 1.75” x 19.0” x 13.0”
Module Distribution (4 ea) HPS35
Standard Size
1U
Unit Weight (lbs) 8.6
Rev. 3.4.09_133
HPS35 Series
 of 4
+ RTN
468.8
442.0
+
RTN
343.2
330.2
3.2
1 19
20 37
PIN DESIGNATION
D-sub
SLOT 1
1: 5V RTN (std-by)
2: (+) sense
6: INHIBIT
7: DC OK
3: (-) sense
8: AC OK
4: 5V (std-by)
9: I2C Address #1
5: not used
10: I2C Address #2
20: I2C CLK
11: Fan Monitor
21: I2C DATA
12: Global AC OK
22: SWP
Connector23:Notused
SLOT 2
13: INHIBIT
14: DC OK
15: AC OK
16: I2C Address
17: I2C Address
18: Fan Monitor
19: Global INHIBIT
SLOT 3
24: INHIBIT
25: DC OK
26: AC OK
27: I2C Address
28: I2C Address
29: Fan Monitor
30: Not used
Pin Outs
SLOT 4
31: INHIBIT
32: DC OK
33: AC OK
34: I2C Address
35: I2C Address
36: Fan Monitor
37: Not used
AC Cord: (North America)
For all other countries, please contact factory.
1) Quail Electronics Series 5050 or equivalent (15A/125V)
Supply End - NEMA 5-15P
Equipment End - IEC 60320-C19
2) Quail Electronics Series 5052 or equivalent (20A/125V)
Supply End - NEMA 5-20P
Equipment End - IEC60320-C19
Blank Panel:
Astec P/N 73-686-000
Pin Description
1 5V Return (std-by)
2 + Remote Sense
3 - Remote Sense
4 5V Stand by
5 Unused
6 Module Inhibit
S
L
O
7 DC OK
8 AC OK
T 9 I2C_ADD#1
1 10 I2C_ADD#2
11 Fan Monitor
12 Global AC OK
13 Module Inhibit
S
L
O
14 DC OK
15 AC OK
T 16 I2C_ADD#1
2 17 I2C_ADD#2
18 Fan Monitor
19 Global Inhibit
Pin Description
20 I2C CLOCK
21 I2C DATA
22 SWP
23 Unused (I2C_INT)
24 Module Inhibit
S
L
O
25 DC OK
26 AC OK
T 27 I2C_ADD#1
3 28 I2C_ADD#2
29 Fan Monitor
30 Unused
31 Module Inhibit
S
L
O
32 DC OK
33 AC OK
T 34 I2C_ADD#1
4 35 I2C_ADD#2
36 Fan Monitor
37 Unused
PSU Connector
617-A-037-P-AJ-1-21 (Male socket) Amphenol
Pin Out Diagram D-sub Connector (male)
Mating Connector
617-A-037-S-AJ-1-20 (Female socket) Amphenol
Pin Out Diagram D-sub Connector (female)



Recommended third-party HPS35Q-NNR-000 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)