AC-DC / Distributed Power Front End 1U
Embedded Power for Business-Critical Continuity
HPS35 Series
350 - 1400 Watts
Total Power: Input Voltage: # of Out...
Description
Embedded Power for Business-Critical Continuity
HPS35 Series
350 - 1400 Watts
Total Power: Input Voltage: # of Outputs: 350 Watts per module 90-264 VAC Single and standby
Rev. 3.4.09_133 HPS35 Series of 4
Electrical Specifications
Input
Input voltage: Frequency: Inrush current: Efficiency: 90-264 VAC typical 47-440 Hz 40 A peak typical @ 25 °C 80% typ @ full load, 230 VAC 0.98 typical @ 115 VAC, full load AC ON -2 sec., Inhibit / Enable 160 ms CISPR 22, EN55022 Level “B” CISPR 22, EN55022 Level “B” 20 ms minimum (independent of input VAC) 5 ms early warning minimum before outputs lose regulation Meets EN61000-3-2 Meets EN60950 ±5% of nominal output voltage ±3% 1% of Vout pk - pk (20 MHz bandwidth) 4% from 25% to 75% load step To within 1% in <300 µsec 115 - 130% of rated output current Protected for continuous short circuit. Auto recovery. 120 - 140% AC Reset. Main and Aux disabled when internal temp exceeds safe operating range Up to 0.5 V total drop Current share to within 10% of total rated current on main output ±5% of nominal
Special Features
Active Power Factor Correction EN61000-3-2 compliant CISPR22, EN55022 Level-B conducted/radiated EMI EN61000 immunity standards 5Vsb@2A Overvoltage protection (OVP) Overcurrent protection (OCP) Overtemperature protection (OTP) AC OK signal and indicator LED DC OK signal and indicator LED Remote Inhibit Remote Sense on main output Hot Plug N+1 Redundant 2 year warranty
Power fa...
Similar Datasheet