HPS3KW-NNR-032

3000 Watts HPS3KW Input Total Power: Input Voltage: # of Outputs: 3000 Watts 180-264 VAC Single Electrical Specs - *Module only Input Range Frequency Inrush Current Efficiency EMI Filter Power Factor Leakage Current 180-264VAC 47 - 63 Hz 100A (peak) 85% typical at full load CISPR22 Class A 0.98 typical 1.16 mA @ 240 VAC Special Features - *Module only Active Power Factor Correction EN61000-3-2 Harmonic Compliance Remote INHIBIT Single Wire Parallel Built-in EMI Filter Low Output Ripple +5V standby Output Built-in Cooling Fans Over Current Protection Over Voltage Protection Over Temperature Protection Hot Swap Built-in OR'ing Diodes Output DC Voltage Adjustment Range Supervisory Output Hold Up Time Over Current Over Voltage 51.4V @ 57A* 5Vsb @ 5A ± 5% 5V @ 5A 20ms 51.4V: 110% - 150% 5Vsb: 101% - 125% 60V Max Requires contact closure from "PSON" to 5Vsb return. TTL signal LOW TTL signal LOW; goes HIGH inthe event of failure TTL logic signal goes high 1001000 msec after 48VDC output. It goes LOW at least 1ms before loss of regulation. Logic Control ENABLE AC OK POWER FAIL POWER GOOD Environmental - *Module only Operating Temperature: +5°C to 40°C Non-Operating Temperature: -40° to +70°C Electromagnetic Susceptibility: Designed to meet EN61000-4-2, -4-3, 4-4, -4-5 Level 3 Humidity: 5 to 95% RH, non-condensing Operating: Sinusoidal Vibration - 0.25G zero to peak, 10 to 500Hz, 0.25 oct/min in each three mutually perpendicular axes. Random vibration ...