DC-DC / Non-Isolated
Embedded Power for Business-Critical Continuity
SXX06E
Rev. 08.01.06
Page 1 of 2
LDO03C Series
15 Watts
Total Power:...
Description
Embedded Power for Business-Critical Continuity
SXX06E
Rev. 08.01.06
Page 1 of 2
LDO03C Series
15 Watts
Total Power: 15 Watts Input Voltage: 3-13.8 Vdc No. of Outputs: Single
Rev. 01.29.09 LDO03C 1 of 4
Electrical Specifications
Output
Output voltage Output setpoint accuracy Line regulation Load regulation Min./max. load See Note 5 0.1% trim resistors Low line to high line Full load to min. load At turn-on At turn-off See Note 1 See Notes 1, 2 0.59-5.1 V ±1.0% ±0.5% ±0.5% 0 A/3 A 0.5% max. 100 mV max. 25 mV Vin=5 V, Vout=2.5 V 235 mV max. deviation 20 μs recovery to within regulation band 3-13.8 Vdc Minimum load Remote OFF See Note 3 Power up Remote ON/OFF Vin=5 V, Vo=2.5 V, lo=3 A Fixed 50 mA 5 mA 3 A @ lo max. 3 ms 2 ms 90% 1.5 MHz UL94V-0 1.7 g (0.06 oz.) 12 V @ 40 °C, 100% load Bellcore 332 Surface mount models 10,000,000 hours 150μm
Special Features
3 A output current rating Input voltage range: 3-13.8 Vdc Adjustable out voltage: 0.59-5.1 V Optional factory setting with power good Excellent transient response Power enable Minimum airflow Small package Termination voltage capability RoHS compliant
Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response
Input
Input voltage range Input current Input current (max.) Start-up time
General
Efficiency (high input) Switching frequency Material flammability Weight MTBF Coplanarity
Safety
UL, cUL 60950-1 TÜV Product Service (EN60950) Certificate No. TBD CB Report and Certificate to IEC...
Similar Datasheet