LPQ173-C

Embedded Power for Business-Critical Continuity LPQ170 Series 175 Watts Total Power: Input Voltage: # of Outputs: 110 - 175 Watts 85-264 Vac 120-300 Vdc Quad Rev. 07.01.08 LPQ170 Series 1 of 4 Electrical Specifications Special Features Active power factor correction IEC EN61000-3-2 compliance Adjustable outputs on 1, 3 & 4 Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Overvoltage protection Overload protection Thermal overload protection DC power good 5 V standby output Adjustable floating 4th output Optional cover (-C suffix) Input Input range: Frequency: Inrush current: Efficiency: EMI filter: 85-264 VAC; 120-300 VDC 47-67 Hz 38 A max, cold start @ 25°C 75% typical at full load Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted 0.99 typical 1.0 mA @ 50/60 Hz, 264 VAC input Power Factor: Safety ground leakage current: Output Maximum power: 110 W convection (75 W with cover) 85 W convection - LPQ173 175 W with 30 CFM forced air (130 W with cover - LPQ172) 3.3 - 5.5V on main; -12 - 15V on 3rd output 3.3 - 25 V on 4th output - LPQ172 3.3 - 5.5 V on 4th output - LPQ173 20 ms @175 W load at nominal line Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 5 V @ 200 mA regulated ±5% Adjustment range: Safety VDE UL CB CSA CE NEMKO 0805/EN60950 (IEC950) UL60950 Certifica...