DatasheetsPDF.com

- 500W. LPS354-CEF Datasheet

DatasheetsPDF.com

- 500W. LPS354-CEF Datasheet






LPS354-CEF 500W. Datasheet pdf. Equivalent




LPS354-CEF 500W. Datasheet pdf. Equivalent





Part

LPS354-CEF

Description

AC-DC / 261W - 500W



Feature


350 Watts LPS350 Series Total Power: 35 0 Watts Input Voltage: 85-264 VAC 120-3 00 VDC # of Outputs: Single Electrical Specs Input Input range Frequency Inru sh current Efficiency EMI filter 85-264 VAC; 120-300 VDC 47-440 Hz 38 A max., cold start @ 25°C 75% typical at full load FCC Class B conducted and radiated CISPR 22 Class B conducted and radiate d EN55022 Class B c.
Manufacture

Emerson

Datasheet
Download LPS354-CEF Datasheet


Emerson LPS354-CEF

LPS354-CEF; onducted and radiated VDE 0878 PT3 Class B conducted and radiated. 0.99 typical <0.5 mA @ 50/60 Hz, 264 VAC input Pow er factor Safety ground leakage current Special Features • • • • • • • • • • • • • • • • Active power factor correction IEC EN6100-3-2 compliance Remote sense Pow er fail and remote inhibit Single wire current sharing Built-in EMI filter Low output rip.


Emerson LPS354-CEF

ple Supervisory output 5 V and 12 V Over voltage protection Overload protection Thermal overload protection DC power go od Cover -C 130 KHz switching frequency Optional with fan cover -CF Optional e nd-mounted fan - CEF Output Maximum po wer With cover: 350 W with 30 CFM force d air, (-C) (-CF) (-CEF) 2:1 wide ratio 5 V @ 500 mA regulated, 12 V @ 150 20 ms @ 350 W load, 1.


Emerson LPS354-CEF

15 VAC nominal line at factory voltage s etting Short circuit protection on all outputs. Case overload protected @ 110- 145% above peak rating 5 V output: 5.7- 6.7 VDC. Other models 10% to 25% above nominal output TTL logic signal goes hi gh 50-150 msec after 5 V output. It goe s low at least 4 msec before loss of re gulation Requires an external contact ( N.O or N.C) to inh.

Part

LPS354-CEF

Description

AC-DC / 261W - 500W



Feature


350 Watts LPS350 Series Total Power: 35 0 Watts Input Voltage: 85-264 VAC 120-3 00 VDC # of Outputs: Single Electrical Specs Input Input range Frequency Inru sh current Efficiency EMI filter 85-264 VAC; 120-300 VDC 47-440 Hz 38 A max., cold start @ 25°C 75% typical at full load FCC Class B conducted and radiated CISPR 22 Class B conducted and radiate d EN55022 Class B c.
Manufacture

Emerson

Datasheet
Download LPS354-CEF Datasheet




 LPS354-CEF
350 Watts
LPS350 Series
Total Power: 350 Watts
Input Voltage: 85-264 VAC
120-300 VDC
# of Outputs: Single
Electrical Specs
Special Features
• Active power factor correction
• IEC EN6100-3-2 compliance
• Remote sense
• Power fail and remote inhibit
• Single wire current sharing
• Built-in EMI filter
• Low output ripple
• Supervisory output 5 V and 12 V
• Overvoltage protection
• Overload protection
• Thermal overload protection
• DC power good
• Cover -C
• 130 KHz switching frequency
• Optional with fan cover -CF
• Optional end-mounted fan - CEF
Environmental
Operating temperature: 0° to 50°C ambient
derate each output at 2.5% per degree from 50° to
70°C
Electromagnetic susceptibility: Designed to meet
IEC 801, -2, -3, -4, -5, -6, Level 3
Humidity: Operating; non-condensing
5% to 95%
Vibration: Three orthogonal axes, sweep at
1 oct/min, 5 min. dwell at four major resonances
0.7 G peak 5 Hz to 500 Hz, operational
Storage temperature: -40° to 85°C
Temperature coefficient: ±.04% per °C
MTBF demonstrated: >550,000 hours at full load
and 25°C ambient conditions
Input
Input range
Frequency
Inrush current
Efficiency
EMI filter
Power factor
Safety ground leakage
current
Output
Maximum power
Adjustment range
Supervisory outputs
mA x2
Hold-up time
Overload protection
Overvoltage protection
Logic Control
Power failure
Remote on/off
DC-OK
Remote sense
85-264 VAC; 120-300 VDC
47-440 Hz
38 A max., cold start @ 25°C
75% typical at full load
FCC Class B conducted and radiated
CISPR 22 Class B conducted and radiated
EN55022 Class B conducted and
radiated
VDE 0878 PT3 Class B conducted and
radiated.
0.99 typical
<0.5 mA @ 50/60 Hz, 264 VAC input
With cover: 350 W with 30 CFM forced
air,
(-C) (-CF) (-CEF)
2:1 wide ratio
5 V @ 500 mA regulated, 12 V @ 150
20 ms @ 350 W load, 115 VAC nominal
line
at factory voltage setting
Short circuit protection on all outputs.
Case overload protected @ 110-145%
above peak rating
5 V output: 5.7-6.7 VDC. Other models
10% to 25% above nominal output
TTL logic signal goes high 50-150 msec
after 5 V output. It goes low at least 4
msec before loss of regulation
Requires an external contact (N.O or
N.C) to inhibit outputs
TTL logic goes high 50-150 msec after
the output. It goes low when there is
loss of regulation.
Compensates for 0.5 V lead drop min.
Will operate without remote sense
connected. Reverse connection protected.
Safety
VDE
UL UL1950
CSA
NEMKO
BABT
CB
CE
0805/EN60950 (IEC950)
E186249
CSA 22.2-234 Level 5
EN 60950/EMKO-TUE
(74-sec) 203
EN60950/BS7002
Certificate and report
Mark (LVD)
21310-3336-0001
LR109492C
P98102115
608857, 608858, 609097
5734, 6280, 6281
rev 07.11.05
128 Technical Support: (888) 41-ASTEC or (407) 241-2752
Americas: (760) 930-4600
Europe (UK) 44 (1384) 842-211
Asia (HK) 852-2437-9662




 LPS354-CEF
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Model
Number
Output
Voltage
Minimum
Load
Maximum Load with
30 CFM Forced Air
Peak
Load1
Regulation2 Ripple
P/P (PARD)3
LPS352-C
LPS353-C
LPS354-C
LPS355-C
5 V (3-6 V)
12 V (6-12 V)
15 V (12-24 V)
24 V ( 24-48 V)
0A
0A
0A
0A
70 A
29.2 A
23.3 A
14.6 A
80 A
33 A
26 A
16 A
±2% 50 mV
±2% 120 mV
±2% 150 mV
±2% 240 mV
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. If optional CF or CEF fans are not used, 30CFM forced air cooling needs to be provided and is required through the length of the power
supply. Not convection rated.
5. Output voltage adjustment requires a 1A load.
6. Remote inhibit resets OVP latch.
Note: -CF suffix added to the model number indicates cover with yop fan;
-CEF suffix added to model number indicates end-mounted fan chassis.
Pin Assignments
Connector
SK1 PIN 1 Neutral
PIN 2
Line
PIN 3
Ground
SK3 PIN 1 N/C
PIN 2
N/C
PIN 3
+ Sense
PIN 4
– Sense
PIN 5
POK
PIN 6
C.Share
PIN 7
DC-OK
PIN 8
Inhibit (N.O.)
PIN 9
Inhibit (N.C.)
PIN 10
COM
SK4 PIN 1 + 5V aux (5V @ 100mA)
PIN 2
– Common
SK5 PIN 1 +Fan 1 (12 V @ 150mA)
PIN 2
– Common
SK6 PIN 1 + Fan 2 (12V @ 150mA)
PIN 2
– Common
Mating Connectors
SK3 Molex 22-01-1104
PINS:08-70-0057
SK4 Molex 22-01-3027
PINS: 08-50-0114
SK5 Molex 22-01-3027
PINS: 08-50-0114
SK6 Molex 22-01-3027
PINS: 08-50-0114
Astec Connector Kit #70-841-011
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Specifications are at factory settings
4. To enable normally closed Remote Inhibit, cut jumper J1.
5. Mounting maximum insertion depth is 0.12”.
6. Warranty: 1 year
7. Weight: 3.6 lb. / 1.64 kg.
6-32 (2 places)
Main Output
Terminal
Block TB1
+ve -ve
M3 (6 places)
SK3
1234 5 678910
SK6 Fan
J1
SK5 Fan
SK4 (5V aux)
M3 (4 places)
#6-32 UNC (8 places)
.24 (6.1)
3.68
(93.6)
(-CF) 3.15
Cover (80)
with fan
2.17
(55)
5.46
(138.6)
6.64
(168.6)
8.52
(216.4)
9.0
(228.6)
10.78
(273.8)
6-32 (3 places)
321
SK1
5.0 (127.0)
.55
(14)
1.30
(33.0)
Optional
(-CEF)
Cover
with fans
1.18 (30.0)
2.5
(63.5)
3.5
(88.9)
.79
(20)
3.42 (87.0)
www.astecpower.com
129










Recommended third-party LPS354-CEF Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)