DatasheetsPDF.com

85W Medical. LPT45-M Datasheet

DatasheetsPDF.com

85W Medical. LPT45-M Datasheet






LPT45-M Medical. Datasheet pdf. Equivalent




LPT45-M Medical. Datasheet pdf. Equivalent





Part

LPT45-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPT40-M Series 40 Watts Total Power: Input Voltage: # of Output s: 40 - 55 Watts 85 - 264 VAC 120 - 30 0VDC Triple Rev. 6.30.09_165 LPT40-M S eries  of 3 Special Features • • • • • • • • • • Universal input 3” x 5” foo tprint Less than 1U high Remote sense o n main output Built-in EMI filter Low output.
Manufacture

Emerson

Datasheet
Download LPT45-M Datasheet


Emerson LPT45-M

LPT45-M; ripple Adjustable 5V output Overvoltage protection Overload protection 110 KHz switching frequency LPX40 enclosure ki t available Electrical Specifications Input Input ra­nge: Frequency: Inrush current: Input current: Efficiency: EMI :  5 - 264 VAC 8 120 - 300 VDC 47 - 44 0 Hz < 18A peak @ 115 VAC;  < 36A peak @ 230 VAC, cold start @ 25 °C 1A max. (RMS) @ 115VAC 70% .


Emerson LPT45-M

typical at full load (60% for LPT41) FCC Class A conducted; CISPR 22 Class A co nducted  EN55022 Class A conducted; VD E 0878 PT3 Class A conducted < 75 µA @ 50/60 Hz, 264 VAC input Safety ground leakage current: Output Maximum Power : 40W for convection; 55W with 30CFM fo rced air ± 2% on output 1; ± 5% on ou tputs 2, 3 -5, +10% minimum 20ms @ 40W load, 115 VAC nominal.


Emerson LPT45-M

line Short circuit protection on all ou tputs. Case overload protected  @ 110% to 145% above peak rating 5.7 to 6.7 V DC on the main output LPT41: 3.6 to 4.6 VDC Compensates for 0.5 V lead drop min . Will operate without remote sense con nected. Reverse connection protected. C ross regulation: Adjustment range: Hold -up time: Overload protection: Overvolt age protection: Re.

Part

LPT45-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPT40-M Series 40 Watts Total Power: Input Voltage: # of Output s: 40 - 55 Watts 85 - 264 VAC 120 - 30 0VDC Triple Rev. 6.30.09_165 LPT40-M S eries  of 3 Special Features • • • • • • • • • • Universal input 3” x 5” foo tprint Less than 1U high Remote sense o n main output Built-in EMI filter Low output.
Manufacture

Emerson

Datasheet
Download LPT45-M Datasheet




 LPT45-M
Embedded Power for
Business-Critical Continuity
LPT40-M Series
40 Watts
Total Power:
Input Voltage:
# of Outputs:
40 - 55 Watts
85 - 264 VAC
120 - 300VDC
Triple
Rev. 6.30.09_165
LPT40-M Series
 of 3
Special Features
• Universal input
• 3” x 5” footprint
• Less than 1U high
• Remote sense on main output
• Built-in EMI filter
• Low output ripple
• Adjustable 5V output
• Overvoltage protection
• Overload protection
• 110 KHz switching frequency
• LPX40 enclosure kit available
Safety
VDE 0750/EN60601-1 (IEC601)
113769
UL UL2601 E182560
CSA CSA 22.2 No.601.1
LR109492
CE Mark (LVD)
Electrical Specifications
Input
Input ra­nge:
Frequency:
Inrush current:
Input current:
Efficiency:
EMI:
Safety ground
leakage current:
Output
Maximum Power:
Cross regulation:
Adjustment range:
Hold-up time:
Overload protection:
Overvoltage protection:
Remote sense:
85 - 264 VAC
120 - 300 VDC
47 - 440 Hz
< 18A peak @ 115 VAC;
< 36A peak @ 230 VAC, cold start @ 25 °C
1A max. (RMS) @ 115VAC
70% typical at full load (60% for LPT41)
FCC Class A conducted; CISPR 22 Class A conducted
EN55022 Class A conducted;
VDE 0878 PT3 Class A conducted
< 75 µA @ 50/60 Hz, 264 VAC input
40W for convection; 55W with 30CFM forced air
± 2% on output 1; ± 5% on outputs 2, 3
-5, +10% minimum
20ms @ 40W load, 115 VAC nominal line
Short circuit protection on all outputs. Case overload protected
@ 110% to 145% above peak rating
5.7 to 6.7 VDC on the main output
LPT41: 3.6 to 4.6VDC
Compensates for 0.5 V lead drop min. Will operate without remote
sense connected. Reverse connection protected.




 LPT45-M
Embedded Power for
Business-Critical Continuity
Rev. 6.30.09_165
LPT40-M Series
 of 3
Environmental Specifications
Operating temperature: 0° to 50 °C ambient derate each output at 2.5% per degree from 50° to 70 °C, -20 °C start up.
Electromagnetic
susceptibility:
Humidity:
Vibration:
Storage temperature:
Temperature coefficient:
MTBF demonstrated:
Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3
Operating; non-condensing 5% to 95%
Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500
Hz, operational
-40° to 85 °C
± .04% per °C
> 550,000 hours at full load and 25 °C ambient conditions
Ordering Information
Model Number
Output
Voltage
Minimum Maximum Load with Maximum Load with
Load
Convection cooling 30CFM Forced Air
Peak
Load1
Regulation2
+5V 0.4A
4A
5A 7A ±2%
LPT42-M
+12V
0.2A
2A
2.5A
4A ±5%
-12V
0A
0.5A
0.7A
1A ±5%
+5V 0.4A
4A
5A 7A ±2%
LPT45-M
+15V
0.2A
2A
2.5A
3A ±5%
-15V
0A
0.5A
0.7A
1A ±5%
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. Minimum Loads are required.
Ripple P/P
(PARD)3
50mV
120mV
120mV
50mV
150mV
150mV
Power Derating Curve
55W
30 CFM Forced Air Cooling
40W
Output 30W
Power
(Watts) 20W
Natural
Convection
Cooling
27.5W
20W
10W
0W
0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C
TA – Ambient Temperature – °C




 LPT45-M
Embedded Power for
Business-Critical Continuity
Mechanical Drawing
0.22"
(5.6)
M1 GND
3.00"
(76.2)
2.55"
(64.8)
SK 1
3N
1L
4.55"
(115.6)
5.00"
(127)
1.14"
(29)
M2
SK201 _ +
Remote Sense
Connector
Voltage
Adj. Pot
1 SK 2
2
3
4
5
6
0.15" (4)
DIA (4 places)
0.12"
(3)
Pin Assignments
Connector LPT42-M
SK1-1
Line
SK1-3
Neutral
SK2-1
+12V
SK2- 2
SK2- 3
+5V
+5V
SK2-4
Common
SK2-5
Common
SK2-6
SK201-1
SK201-2
-12V
+Sense
-Sense
LPT45-M
Line
Neutral
+15V
+5V
+5V
Common
Common
-15V
+Sense
-Sense
Mating­ Connectors
AC Input: Molex 09-50-8031 (USA)
09-91-0300 (UK)
PINS: 08-52-0113
DC Molex 09-50-8061 (USA)
Outputs: 09-91-0600 (UK)
PINS: 08-52-0113
Remote Molex 22-01-2025
Sense: PINS: 08-52-0123
Emerson Network Power Connector Kit #70-841-006,
includes all of the above
1. Specifications subject to change without notice.
­2. All dimensions in inches (mm), tolerance is ±0.02”­­
(±0.5mm)
3. Mounting holes M1 and M2 should be grounded for
EMI purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory
settings at 115 VAC input, 25 °C unless otherwise
stated.
6. Warranty: 2 year
7. Weight: 0.5lbs/0.23kg
­Americas
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Rev. 6.30.09_165
LPT40-M Series
 of 3
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.PowerConversion.com
techsupport.embeddedpower
@emerson.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2009 Emerson Electric Co.






Recommended third-party LPT45-M Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)