DatasheetsPDF.com

85W Medical. LPT52-M Datasheet

DatasheetsPDF.com

85W Medical. LPT52-M Datasheet






LPT52-M Medical. Datasheet pdf. Equivalent




LPT52-M Medical. Datasheet pdf. Equivalent





Part

LPT52-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPT50-M Series 55 Watts Total Power: Input Voltage: # of Output s: 47 - 55 Watts 90 - 264 VAC 127 - 30 0 VDC Triple Rev. 4.27.09_148 LPT50-M Series  of 3 Special Features • Med ical Safety Approvals • Universal inp ut • 2” x 4” footprint • Less t han 1U high • Overpower and short cir cuit protection • High efficienc.
Manufacture

Emerson

Datasheet
Download LPT52-M Datasheet


Emerson LPT52-M

LPT52-M; y • High MTBF • Built in EMI filter (CISPR 22 Class B) • LED power good i ndicator • Input power < 74 watts • Complies with EN61000 -3-2 • 85 kHz switching frequency • Dual AC fuses UL Class I approved • LPX50 enclos ure kit available Electrical Specifica tions Input Input ra­nge: Frequency: I nrush current: Efficiency: EMI/RFI: Saf ety ground leakage current: 90 - 264 .


Emerson LPT52-M

VAC (wide range) 127-300 Vdc 47-440 Hz < 60 A peak @ 230 VAC, cold start @ 25 C 80% typical at full load FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B conducted, EN60601-1-2 275uA @ 50/60 Hz; 264 VAC input Outpu t Maximum power: Hold-up time: Overpowe r protection: 55 W for convection (LPT5 1, 47.4 W) 10/20 ms 115/230 VAC input line Short circuit .


Emerson LPT52-M

protection on all outputs. Case overpowe r protected @ 110-160% of normal rating Overvoltage protection: 30-50% above n ominal output Environmental Specificat ions Operating temperature: Storage tem perature: Electromagnetic susceptibilit y: Humidity: 0° to 50 °C ambient. De rate each output as 2.5% per degree fro m 50° to 70 °C. -20 °C start up -40 °C to +85 °C Designed t.

Part

LPT52-M

Description

AC-DC / 10W - 85W Medical



Feature


Embedded Power for Business-Critical Con tinuity LPT50-M Series 55 Watts Total Power: Input Voltage: # of Output s: 47 - 55 Watts 90 - 264 VAC 127 - 30 0 VDC Triple Rev. 4.27.09_148 LPT50-M Series  of 3 Special Features • Med ical Safety Approvals • Universal inp ut • 2” x 4” footprint • Less t han 1U high • Overpower and short cir cuit protection • High efficienc.
Manufacture

Emerson

Datasheet
Download LPT52-M Datasheet




 LPT52-M
Embedded Power for
Business-Critical Continuity
LPT50-M Series
55 Watts
Total Power:
Input Voltage:
# of Outputs:
47 - 55 Watts
90 - 264 VAC
127 - 300 VDC
Triple
Rev. 4.27.09_148
LPT50-M Series
 of 3
Special Features
• Medical Safety Approvals
• Universal input
• 2” x 4” footprint
• Less than 1U high
• Overpower and short circuit
protection
• High efficiency
• High MTBF
• Built in EMI filter
(CISPR 22 Class B)
• LED power good indicator
• Input power < 74 watts
• Complies with EN61000 -3-2
• 85 kHz switching frequency
• Dual AC fuses
• UL Class I approved
• LPX50 enclosure kit available
Safety
UL: UL 60601-1
CSA: CSA-C22.2 No. 601.1-M90
VDE: EN60601-1
CE: LVD
Electrical Specifications
Input
Input ra­nge:
90 - 264 VAC (wide range) 127-300 Vdc
Frequency:
Inrush current:
47-440 Hz
< 60 A peak @ 230 VAC, cold start @ 25 °C
Efficiency:
80% typical at full load
EMI/RFI:
Safety ground leakage
current:
FCC Class B conducted; CISPR 22 Class B conducted; EN55022 Class B
conducted, EN60601-1-2
275uA @ 50/60 Hz; 264 VAC input
Output
Maximum power:
55 W for convection (LPT51, 47.4 W)
Hold-up time:
10/20 ms 115/230 VAC input line
Overpower protection: Short circuit protection on all outputs.
Case overpower protected @ 110-160% of normal rating
Overvoltage protection: 30-50% above nominal output
Environmental Specifications
Operating temperature:
0° to 50 °C ambient. Derate each output as 2.5% per degree from
50° to 70 °C. -20 °C start up
Storage temperature:
-40 °C to +85 °C
Electromagnetic susceptibility: Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity:
Operating; non-condensing 10% to 95% RH
Vibration:
IEC68-2-6 to the levels of IEC721-3-2
MTBF demonstrated:
> 550,000 hours at full load and 25 °C ambient conditions




 LPT52-M
Embedded Power for
Business-Critical Continuity
Ordering Information
Model
Number
Output
Voltage
Minimum Maximum Load with
Load Convection Cooling
Peak
Load1
Regulation2
LPT51-M
+3.3 V
+5 V
+12 V
0.8 A
0.1 A
0A
8A
3A
0.5 A
9 A ±2%
4 A ±6%
1 A ±5%
LPT52-M
+5 V
+12 V
-12 V
0.5 A
0.1 A
0A
8A
3A
0.5 A
9 A ±2%
4 A ±5%
1 A ±5%
LPT53-M
+5 V
+15 V
-15 V
0.5 A
0.1 A
0A
8A
2.4 A
0.5 A
9A
3.2 A
0.7 A
±2%
±5%
±5%
LPT54-M
+5 V
+24 V
+12 V
0.5 A
0.1 A
0A
8A
1.5 A
0.5 A
9A
2A
0.7 A
±2%
±7%
±5%
1. Peak current lasting < 15 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
Ripple P/P (PARD)3
50 mV
50 mV
120 mV
50 mV
120 mV
120 mV
50 mV
150 mV
150 mV
50 mV
240 mV
120 mV
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
Rev. 4.27.09_148
LPT50-M Series
 of 3
Pin Assignments
LPT51-M
SK1-1 Line
SK1-3 Neutral
LPT52-M
Line
Neutral
LPT53-M
Line
Neutral
SK2-1
SK2-2
SK2-3
SK2-4
SK2-5
SK2-6
+3.3 V
+3.3 V
Common
Common
+12 V
5V
+5 V
+5 V
Common
Common
-12 V
+12 V
+5 V
+5 V
Common
Common
-15 V
+15 V
LPT54-M
Line
Neutral
+5 V
+5 V
Common
Common
+12 V
+24 V
Mating­ Connectors
AC Input:
Molex 09-50-8031 (USA)
09-91-0300 (UK)
PINS: 08-52-0113
DC Outputs: Molex 09-50-8061 (USA)
09-91-0600 (UK)
PINS: 08-52-0113
Emerson Network Power Connector Kit #70-841-006, includes all of the
above
Notes:
1. Specifications subject to change without notice.
­2. All dimensions in inches (mm), tolerance is ±0.02”­­ (±0.5mm)
3. Mounting holes M1 and M2 should be grounded for EMI purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory settings at 115 VAC
input, 25 °C unless otherwise stated.
6. Warranty: 2 year
7. Weight: 0.45 lbs/0.20 kg




 LPT52-M
Mechanical Drawing
M1
1
3
GND
Mounting hole
Ø4.0(4x)
Max. Screw Head
Diameter .22” (5.6)
Embedded Power for
Business-Critical Continuity
3.73
[94.7]
4.00
[101.6]
M2
6
1
0.197” (5.0) Minimum
Standoff Height
Rev. 4.27.09_148
­Americas
5810 Van Allen Way
LPT50-M Series
 of 3
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.PowerConversion.com
techsupport.embeddedpower
@emerson.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
EmersonNetworkPower.com
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2008 Emerson Electric Co.






Recommended third-party LPT52-M Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)