AC-DC / 261W - 500W
Embedded Power for Business-Critical Continuity
NTS350 Series
350 Watts
Total Power: Input Voltage: # of Outputs: ...
Description
Embedded Power for Business-Critical Continuity
NTS350 Series
350 Watts
Total Power: Input Voltage: # of Outputs: 200 - 350 Watts 85 - 264 VAC 120 - 300VDC Single
Rev. 11.24.08 NTS350 Series of 3
Electrical Specifications
Special Features
Active power factor correction IEC EN6100-3-2 compliance Remote sense Power fail and remote inhibit Single wire current sharing Built-in EMI filter Low output ripple 5V standby 12V fan output Overvoltage protection Overload protection Thermal overload protection DC power good Built in OR-ing diode / FET Optional fan cover (-CF suffix)
Input
Input range Frequency Inrush current Efficiency EMI filter Safety ground leakage current 85 - 264 VAC (wide range) 47-440 Hz 38A max., cold start @ 25°C 85% typical at full load FCC Class B conducted and radiated; CISPR22 Class B conducted and radiated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B conducted and radiated. <0.5mA @ 50/60 Hz, 264 VAC input
Output
Maximum power Adjustment range Standby output Fan output Hold-up time Overload protection 200W for convection; 350W with 30CFM forced air ±5% 5V @ 2A regulated, ±5% 12 V @ 1A, -5 %, +7%, 0.5A for -CF version 20 ms @ 350 W load, 115 VAC nominal line at factory voltage setting Short circuit protection on all outputs. Case overload protected @ 115130% above peak rating
Overvoltage protection 20-35% above nominal output
Safety
TUV UL CSA NEMKO AUSTEL CB CE 60950 0950 6095...
Similar Datasheet