NXI110-12P1V8CY

Embedded Power for Business-Critical Continuity NXI110 Series Single output, 5 Bit Selectable (Non-Isolated) Total Power: 110W Input Voltage: 11 - 13.2VDC # of Outputs: Single Rev.03.23.07 nxi110 1 of 4 Special Features Meets VRM9.0 specification High efficiency: 84% typical @ Vin = 12 V, Vout = 1.7 V, Iout = 60 A Multi-phase power conversion Microprocessor voltage identification input 5 Bit VID input - 1.10 Vdc to 1.85 Vdc in 25 mV steps Remote enable pin Power good signal True double ended differential remote sense Democratic current sharing, no need for master/slave configuration Up to 50 A/μsec load transient no load to full load, recovery within 50 μsec Overcurrent and short circuit protection Overvoltage protection with on board fuse Vertical plug-in to standard motherboard connector No minimum load requirement Available RoHS compliant 2 year warranty The NXI110 non-isolated dc-dc converters are designed to meet the exceptionally fast transient response requirements of today’s microprocessors and fast switching logic in a compact size at a very affordable price. Advanced Circuit techniques, component selection and placement optimization, state-of-the-art thermal packaging, and Surface Mount Technologies provide a high power density, highly reliable, and very precise voltage regulation system for advanced microprocessors. Multi-phase power conversion techniques allow the NXI converters to lead the industry with regard to conversion eff...