PTV12010L

12 Vin single output DC-DC CONVERTERS POLA Non-isolated NEW Product 1 8 A output current 12 V input voltage Wide-output voltage adjust 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ Auto-track™ sequencing* Pre-bias start-up Efficiencies up to 93% Output ON/OFF inhibit Vertical through-hole mounting Point-of-Load-Alliance (POLA) compatible Undervoltage lockout Available RoHS compliant The PTV12010 is a non-isolated dc-dc converter from Artesyn under the Point of Load Alliance (POLA) standard. The vertical mounting option of the PTV12010 module provides performance in less than 20% of the space that is required by alternative solutions. The Auto-Track™ feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down. The PTV12010 has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ output voltage range with up to 8 A output current, which allows for maximum design flexibility and a pathway for future upgrades. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 100 µF and 10 µF (Ceramic), Cout = 0 µF OUTPUT SPECIFICATIONS Voltage adjustability (See Note 4) Setpoint accuracy Line regulation Load regulation Total regulation Minimum load Ripple and noise 20 MHz ban...