Document
Embedded Power for Business-Critical Continuity
SIL10E Series
3.0 Vin - 5.5 Vin
Rev.3.4.09_96 SIL10E_05 Series of 4
Total Power: 49.9 Watts Input Voltage: 3.0-5.5 Vdc # of Outputs: Single
Electrical Specifications
Special Features
• • • • • • • • • • • 10 A Current rating Input voltage range: 3 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 7,000,000 hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard footprint and pin out Available RoHS compliant 2 year warranty
Input
Input voltage range: Input current: Input current (max.): Input reflected ripple: Remote ON/OFF: Start-up time: No load 3.0-5.5 Vdc 70 mA 8 A max. @ lo max. and Vout = 3.3 V 65 mA rms (See Note 2) 20 ms Fixed output versions 5 Vin with wide trim 3.3 Vin with wide trim ±10% 0.8 - 3.63 Vdc 0.8 - 2.75 Vdc ±0.4% typ. ±0.2% typ. ±1.0% typ. 0A None 50 mV pk-pk 25 mV rms max. ±0.01%/˚C 50 mV max. deviation 50µs recovery to within ±1.0% 10% Vo compensation
Output
Voltage adjustability: (See Note 1) Setpoint accuracy: Line regulation: Load regulation: Minimum load: Overshoot/Undershoot: Ripple and noise: Temperature co-efficient: Transient response: Remote sense:
Safety
• UL/cUL CAN/CSA 22.2 No. 60950-1-03/UL 60950-1, File No. E186249 • TÜV Product Service (EN60950) Certificate No. B 08 05 51485 378 • CB report and certificate to IEC60950, Certificate No. DE3-51686M1
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Embedded Power for Business-Critical Continuity
Rev.3.4.09_96 SIL10E_05 Series of 4
EMC Characteristics
Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3
General Specifications
Efficiency: Insulation voltage: Switching frequency: Approvals and standards: Material flammability: Dimensions Pin length: Weight: MTBF: Telcordia SR-332 MIL-HDBK-217F (L x W x H) (Vertical) Fixed See table Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 50.8 x 7.8 x 12.7 mm 2.0 x 0.31 x 0.5 inches 0.135 ± 0.02 in (3.43 ± 0.5 mm) 5 g (0.18 oz) 7,042,000 hours 680,000 hours
Environmental Specifications
Thermal performance: (See Note 3) Operating ambient temperature Non-operating -40° C to +100 °C -40 °C to +125 °C
Protection
Short circuit: Thermal: Continuous Automatic recovery
Embedded Power for Business-Critical Continuity
Ordering Information
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Rev.3.4.09_96 SIL10E_05 Series of 4
Ordering Information
Output Power (Max.) 8.8 W 11 W 13.2 W 16.5 W 19.8 W 22 W 27.5 W 36.3 W 36.3 W Input Voltage 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 4.5 - 5.5 Vdc 4.5 - 5.5 Vdc Output Voltage 0.8 V 1V 1.2 V 1.5 V 1.8 V 2V 2.5 V 3.3 V 0.8 - 3.63 V Output Currents Min 0A 0A 0A 0A 0A 0A 0A 0A 0A Max 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A Efficiency (typ.) 83% 86% 88% 90% 92% 93% 94% 95% 95% Regulation Line ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% Load ±1.5% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% M������������� odel Numbers (4, 5, 6) SIL10E-05S0V8-VJ SIL10E-05S1V0-VJ SIL10E-05S1V2-VJ SIL10E-05S1V5-VJ SIL10E-05S1V8-VJ SIL10E-05S2V0-VJ SIL10E-05S2V5-VJ SIL10E-05S3V3-VJ SIL10E-05W3V3-VJ
Part Number System with Options
SIL10E-05S3V3-VJ
Packaging Options (5) J = Pb-free RoHS 6/6 compliant Mounting Options V = Vertical Mount H = Horizontal Mount Output Voltage 2.5 V, 3.3 V, etc Number of Outputs S = Single W = Wide
Product Family SIL = Single In Line Rated Output Current 10 = 10 Amps Performance E = Enhanced Performance Input Voltage 05 = 3.0 V to 5.5 V 12 = 10 V to 14 V
Output Voltage Adjustment of the SIL10E-05W3V3J Series
The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3 V. • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc • When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc
Notes
1 When Vin ³ 4.5 V, then Vout can be adjusted from 0.8 V to 3.6 V. When Vin < 4.5 V, then Vout can be adjusted from 0.8 V to 2.75 V. 2 The SIL10E features a ‘Negative Logic’ Remote ON/OFF operation. If you are not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL10E: Configuration Remote pin open circuit Re.