JMF602

JMF602 JMF602 SATA II to Flash Controller Overview JMF602 is a single chip with Serial ATA Gen II and USB 2.0 combo to NAND flash interface. It is an innovative design to provide high bandwidth for flash memory access. JMF602 can support the maximum read and write speed to drive the limit of flash memory. It supports up to 256 NAND Flash chips. JMF602 is available in 211 pin TFBGA (12mm x 12 mm) package. JMF602 supports a variety of popular NAND flash memory, including Toshiba, Samung, Hynix/ST and Intel/Micron Flash. With the embedded hardware error correction engines and the robust bad block management technology, JMF602 is suitable for PC and industrial solid state drive applications. In addition, dynamic and whole drive static wear leveling are used in JMF602 to provide the best extension of drive life time. JMicron also provides reference designs in different drive form factors, mass production tool and firmware update tool to help customers go on mass product quickly. Feature Compliance Compliant with Universal Serial Bus Specification Revision 2.0 Compliant with USB Mass Storage Class specification version 1.0 Compliant with Serial ATA International Organization : Serial ATA Revision 2.6 USB 2.0 www.DataSheet4U.com USB Bulk mode transport protocol SATA II Supports 1-port 3.0Gbps SATA II interface FLASH Supports up to 256 CEs. 170/135 MB/s Sequential read/write rates (SLC) Enhanced endurance by Dynamic/Static wear-leveling Supports BCH ECC to correct...