DatasheetsPDF.com

AMIS-52000

AMI SEMICONDUCTOR

Single-Chip Radio Transceiver

AMIS-52000 Single-Chip Radio Transceiver 1.0 Introduction The AMIS-52000 is a low cost, ultra low power ASK/OOK (Amplitu...


AMI SEMICONDUCTOR

AMIS-52000

File Download Download AMIS-52000 Datasheet


Description
AMIS-52000 Single-Chip Radio Transceiver 1.0 Introduction The AMIS-52000 is a low cost, ultra low power ASK/OOK (Amplitude Shift Keying/On-Off Shift Keying) transceiver intended for narrow band RF applications. The device is targeted for applications at 433MHz but can operate from 260 to 700MHz. The adjustable RF output ranges from –26 to +6dBm into a matched 50ohm load. The receiver contains two independent receive channels which can be Data Sheet connected to separate antennas for antenna diversity applications. On chip trim registers eliminate manual trimming of external components. Using the on chip trimming, transmit and receive frequencies achieve 5ppm accuracy over the entire voltage and temperature range. 2.0 Key Features Very low power single-chip transceiver Minimal external components Low power RC oscillator Unique Quick Start, low-noise oscillator (patent pending) Extreme low power RF Sniff Mode™, wake on RSSI Internal trim functions I2C control interface Serial TX/RX data port Clock generation for an external microprocessor Wake up on RSSI Unique antenna diversity dual receiver (patent pending) Internal VCO/PLL tuning varactor 3.0 Technical Features Operating Frequency: Range 260 to 700MHz TX Output Power: +6dBm RX Sensitivity: Sniff Mode: -93dBm minimum Receive: -103dBm minimum @ 1Kbps Data Rate: 1 to 19.2Kbps, user selectable www.DataSheet4U.com Power Requirements: Receive: 7.5mA (continuous) Transmit: 25mA full pow...




Similar Datasheet




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)