Low-Power Transceiver
AMIS-52150
Low-Power Transceiver with Clock and Data Recovery
Data Sheet
1.0 Introduction
The AMIS-52150 is a cost-eff...
Description
AMIS-52150
Low-Power Transceiver with Clock and Data Recovery
Data Sheet
1.0 Introduction
The AMIS-52150 is a cost-effective, ultra-low power single-chip wireless transceiver. It combines the proven Amplitude Shift Key/On-Off Key (ASK/OOK) modulation technology of the AMIS-52050 with data clock recovery. Based on key features, such as dual independent receive channels, Quick Start crystal oscillator, Sniff Mode™ signal acquisition, and data clock recovery, the AMIS-52150 is ideally suited for a wide range of applications, including point-to-point wireless data links, costoptimized wireless monitor solutions, and very low power remote wireless sensors, among others.
2.0 Key Features
Data clock recovery Auto slicing of data Very low-power single-chip transceiver Minimal external components Low-power RC oscillator Quick Start crystal oscillator Ultra-low power RF Sniff Mode™, with wake-up on RSSI Internal trim functions reduce external component requirements I2C control interface Serial TX/RX data port Clock generation for an external microprocessor Wake-up on RSSI Antenna diversity dual receiver Internal VCO/PLL tuning varactor Wake-up interrupt to external controller
3.0 Technical Features
www.DataSheet4U.com
Operating frequency range: o Quick Start, from 350MHz to 448MHz o Non-Quick Start, from 300MHz to 768MHz TX output power: +12dBm RX sensitivity: o Sniff Mode: -93dBm minimum o Receive: -117dBm minimum @ 1Kbps, with CDR Data rate:...
Similar Datasheet