DatasheetsPDF.com

AMIS-710411-A7 Dataheets PDF



Part Number AMIS-710411-A7
Manufacturers AMI SEMICONDUCTOR
Logo AMI SEMICONDUCTOR
Description CIS Module
Datasheet AMIS-710411-A7 DatasheetAMIS-710411-A7 Datasheet (PDF)

AMIS-710411-A7: 400dpi CIS Module Data Sheet 1.0 General Description The AMIS-710411-A7 (PI411MC-A7) is a contact imaging sensor (CIS) module that can operate from a single 5.0V supply. It is a linear scanning array composed of 11 AMIS-720422 (PI3022) imaging sensor chips. The AMIS-720422 is a 400 dots per inch (dpi) solid-state line imaging sensor chip with 128 photo sensitive elements, which are also a product of AMIS. Eleven of these devices are sequentially cascaded to form the linear scan.

  AMIS-710411-A7   AMIS-710411-A7


Document
AMIS-710411-A7: 400dpi CIS Module Data Sheet 1.0 General Description The AMIS-710411-A7 (PI411MC-A7) is a contact imaging sensor (CIS) module that can operate from a single 5.0V supply. It is a linear scanning array composed of 11 AMIS-720422 (PI3022) imaging sensor chips. The AMIS-720422 is a 400 dots per inch (dpi) solid-state line imaging sensor chip with 128 photo sensitive elements, which are also a product of AMIS. Eleven of these devices are sequentially cascaded to form the linear scanning array with a total of 1408 photo sensing elements. This imaging device is fabricated using MOS imaging sensor technology for its high-speed performance and high sensitivity. It is designed for scanning A7 size (89mm) documents with 400dpi resolution. Applications include ticket, check and card scanners, a variety of mark readers, and other automation equipment. 2.0 Key Features • • • • • • • • • Low power-single power supply at 5.0V Light source, lens and sensor are integrated into a single module 15.7dpm resolution, 89mm scanning length High speed page scan - up to 282µsec/line @ 5MHz pixel rate Wide dynamic range Analog output 660 LED light source Compact size ≅ 13mm x 25.6mm x 102mm Light weight 3.0 Functional Description The AMIS-710411-A7 consists of 11 imaging array sensors, which are cascaded to provide 1408 photo-detectors. Each sensor has its associated multiplex switches and a digital shift register, which controls its sequential readout. Each sensor also contains a chip select switch so that each following chip is accessed sequentially as its predecessor chip completes its scan. Theses chips are mounted on a printed circuit board (PCB) along with clock buffers and a video signal amplifier (see Figure 1). www.DataSheet4U.com The PCB containing the imaging array is enclosed in a module housing along with a one-to-one graded indexed micro lens array, which focuses the image of the scanned documents onto the sensing line of the sensor chips. The document is illuminated with an LED light source, which is also mounted in the housing (see Figure 2). The pictorial cross section (Figure 2) shows the LED bar light source and its Illumination path. The light on the document reflects images on the document. The reflected images focus through the micro lens onto the image sensing line of the chips where the images are converted to proportional electrical charges. An on board amplifier processes these signal charges into proportional video signal voltages, which are sent out to the output video port. All components are housed in a small plastic housing and covered with a glass window. This cover glass not only serves to protect all of the critical components within the housing from dust, but along with the micro lens, it determines the depth-of-focus because it lies in the optical path. AMI Semiconductor – July 06, M-20593-001 www.amis.com 1 AMIS-710411-A7: 400dpi CIS Module Data Sheet Figure 1: AMIS-710411-A7 Module Block Diagram www.DataSheet4U.com Figure 2: AMIS-710411-A7 Cross Sectional View AMI Semiconductor – July 06, M-20593-001 www.amis.com 2 AMIS-710411-A7: 400dpi CIS Module 4.0 Pin Out Description Data Sheet There is a connector located at the end of the module. The outline of the module in Figure 4 of the mechanical section illustrates the connector location. With the module window facing down on a flat surface, the viewer looking down on backside of the module and the connector's pins facing the viewer, the connector is located on the right-hand end of the module. The connector is a surface-mount-flex input, Molex 52207-0890, 1mm single 10-pin row. Its I/O designation is provided in Table 1. The location of Pin number 1 is found closest to end of the module. Table 1: I/O Designation Pin Number 1 2 3 4 5 6 7 8 9 10 Symbol Vout Gnd Vdd (+5V) NA Gnd SP Gnd CP GLED VLED Names and Functions Analog video output Ground; 0V Positive power supply Not used Ground; 0V Shift register start pulse Ground; 0V Sampling clock pulse Ground for the light source Supply for the light source 5.0 Absolute Maximum Rating Table 2 shows the absolute maximum parameters. These parameters should not be used in prolonged operation. Table 2: Absolute Maximum Rating Parameter Power supply Symbols Vdd Idd VLED ILED Vih Vil Maximum Rating 7.0 5.7 50 300 Vdd -0.5 Units V mA V mA V V Input clock pulse (high) Input clock pulse (low) www.DataSheet4U.com 6.0 Operating Environment Table 3: Operating Environment Parameter Operating temperature Operating humidity Storage temperature Storage humidity Symbols Top Hop Tstg Hstg Maximum Rating 0 to 50 10 to 85 -25 to 85 5 to 95 Units ° C % ° C % AMI Semiconductor – July 06, M-20593-001 www.amis.com 3 AMIS-710411-A7: 400dpi CIS Module 7.0 Electro-Optical Characteristics (25°C) Table 4: Electro-Optical Characteristics at 25 C Parameter Symbol Number of photo detectors Pixel-to-pixel spacing (1) Line scanning rate Tint (2) Clock frequency Fclk (3) Bright output voltage Video out.


AMIS-710409-A4 AMIS-710411-A7 AMIS-710414-A4


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)