Dual Rectifier Diode
MP04HB910
Replaces February 2001, version DS5425-1.2
FEATURES s Dual Device Module s Electrically Isolated Package s Pr...
Description
MP04HB910
Replaces February 2001, version DS5425-1.2
FEATURES s Dual Device Module s Electrically Isolated Package s Pressure Contact Construction s International Standard Footprint s Alumina (Non-toxic) Isolation Medium
APPLICATIONS s Power Supplies s Large IGBT Circuit 'Front Ends' s Rectifiers s Battery Chargers
VOLTAGE RATINGS
Type Number
MP04HB910-30 MP04HB910-28 MP04HB910-26 MP04HB910-24
Repetitive Peak Voltages VRRM V
3000 2800 2600 2400
Conditions
Tvj = –40˚ to 150˚C, VRSM = VRRM + 100V
Lower voltage grades available
MP04HB910
Dual Rectifier Diode Module Preliminary Information
DS5425-1.3 July 2001
KEY PARAMETERS
VRRM IF(AV) IFSM (per arm) IF(RMS) Visol
3000V 915A 20000A 1440A 3000V
1
2
3
Fig.1 HB circuit configuration
ORDERING INFORMATION
Order As: MP04HB910-XX
XX shown in the part number about represents VRRM/100 selection required. Note: When ordering, please use the complete part number. Please quote full part number in all correspondance.
www.dynexsemi.com
Outline type code: MP04 (See package details for further information) Fig. 2 Electrical connections - (not to scale)
1/7
MP04HB910
ABSOLUTE MAXIMUM RATINGS - PER ARM
Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to Absolute Maximum Ratings f...
Similar Datasheet