DatasheetsPDF.com

Power Relay. 3572-1A-xx-x-xx-xx Datasheet

DatasheetsPDF.com

Power Relay. 3572-1A-xx-x-xx-xx Datasheet






3572-1A-xx-x-xx-xx Relay. Datasheet pdf. Equivalent




3572-1A-xx-x-xx-xx Relay. Datasheet pdf. Equivalent





Part

3572-1A-xx-x-xx-xx

Description

Automotive Power Relay



Feature


3572 AUTOMOTIVE POWER RELAY FEATURES l Direct PCB Mountable l High Performance l Suitable for various loads l Heav y Duty l Immersion Cleanable Version avai lable AREAS OF APPLICATION Contact Conf iguration Contact Material Contact Rati ng at 23 C 0 APPLICATION l Direction I ndicators l Air-Conditioning Systems l Boby Controllers l Head Lamp Control l Ventilation Motors.
Manufacture

OEN

Datasheet
Download 3572-1A-xx-x-xx-xx Datasheet


OEN 3572-1A-xx-x-xx-xx

3572-1A-xx-x-xx-xx; l Security Systems TECHNICAL DATA FOR CONTACT SIDE RESISTIVE / INDUCTIVE LOAD S : : 12 VDC 24 VDC Electrical Life Ope rations Min. Mechanical Life Operations Min. Contact Voltage Drop at 10 A (Min ) Ma ximum Switching Current @ 12.8 VDC For 3 Sec. : : : : : : 1A/1C Silver Ni ckel 45 / 30 A 20 / 10 A 2 x 105 1 x 10 7 30mV 100A 5 x 105 1 x 107 50mV 100A INDICATOR LAMP LOA.


OEN 3572-1A-xx-x-xx-xx

DS** 1A Palladium Copper* / Silver Nicke l 12 A *The moving contact (Pdcu) must be connected to positive potential www .DataSheet4U.com Nominal Coil Power Ope rating Power Operate Time** Release Tim e** **Under in troduction GENERAL DAT A FOR COIL SIDE : : : : 1.6W (Approx) 0 .9W (Approx) 5 milli Seconds 3 milli Se conds CIRCUIT DIAGRAM COM NO ** At nominal voltage wi.


OEN 3572-1A-xx-x-xx-xx

thout coil suppression (excluding bounce ) COIL OPERATING CONDITIONS Ambient T emperature Ma ximum Temperature Dielect ric Strength Insulation Resistance Vibr ation Resistance without change in the switching state>10µS Shock Resistance without change in the switching state>1 0µS : : : : : : -400C to +850C 1550C 5 00VRMS 100 MS Min. At 500 VDC, 250C RH 50 10-200Hz, 20-40g .

Part

3572-1A-xx-x-xx-xx

Description

Automotive Power Relay



Feature


3572 AUTOMOTIVE POWER RELAY FEATURES l Direct PCB Mountable l High Performance l Suitable for various loads l Heav y Duty l Immersion Cleanable Version avai lable AREAS OF APPLICATION Contact Conf iguration Contact Material Contact Rati ng at 23 C 0 APPLICATION l Direction I ndicators l Air-Conditioning Systems l Boby Controllers l Head Lamp Control l Ventilation Motors.
Manufacture

OEN

Datasheet
Download 3572-1A-xx-x-xx-xx Datasheet




 3572-1A-xx-x-xx-xx
3572
AUTOMOTIVE POWER RELAY
FEATURES
l Direct PCB Mountable
l High Performance
l Suitable for various loads
l Heav y Duty
l Immersion Cleanable Version available
APPLICATION
l Direction Indicators
l Air-Conditioning Systems
l Boby Controllers
l Head Lamp Control
l Ventilation Motors
l Security Systems
AREAS OF APPLICATION
Contact Configuration
Contact Material
Contact Rating at 230C - 12 VDC
24 VDC
Electrical Life Operations Min.
Mechanical Life Operations Min.
Contact Voltage Drop at 10 A (Min)
Ma ximum Switching Current
@ 12.8 VDC For 3 Sec.
TECHNICAL DATA FOR CONTACT SIDE
RESISTIVE / INDUCTIVE LOADS
: 1A/1C
INDICATOR LAMP LOADS**
1A
: Silver Nickel
Palladium Copper* / Silver Nickel
: 45 / 30 A
12 A
: 20 / 10 A
: 2 x 105
5 x 105
: 1 x 107
1 x 107
: 30mV
50mV
: 100A
100A
*The moving contact (Pdcu) must be connected to positive potential
www.DataSheet4U.com GENERAL DATA FOR COIL SIDE
Nominal Coil Power
: 1.6W (Approx)
Operating Power
: 0.9W (Approx)
Operate Time**
: 5 milli Seconds
Release Time**
: 3 milli Seconds
** At nominal voltage without coil suppression (excluding bounce)
OPERATING CONDITIONS
Ambient Temperature
Ma ximum Temperature
Dielectric Strength
Insulation Resistance
Vibration Resistance without change
in the switching state>10µS
Shock Resistance without change
in the switching state>10µS
:
:
:
:
:
:
-400C to +850C
1550C
500VRMS
100 MS Min. At 500 VDC, 250C
RH 50
10-200Hz, 20-40g
30g, 11mS
**Under in troduction
CIRCUIT DIAGRAM
COM NO
COIL
1Form A
COM NO
NC
COIL
1Form C




 3572-1A-xx-x-xx-xx
HOW TO ORDER
3572 - 1A - 12 - X - 01 - X X
Product
Series
Contact Form
1A - 1 Form A
1C - 1 Form C
E-lmmersion Cleanable
E5-Open
250g Release spring &
1.7mm wide contact Terminal
Plating
P- Nickel Plated Body
E-Copper Plated Body
Nominal Coil Voltage
(Refer coil data)
DRILLING PATTERN
2.5 min
COIL DATA
06 3.3 0.6
19
12 6.8 1.2
90
24 13.9 2.4
362
*Lower pick-up voltages available on request
DIMENSIONS
SEALED TYPE
12.1 3.30
2.15
www.DataSheet4U.com
2.95
2.75
14.25
0.3 min
3.5 ma x 22.5 ma x
21.5 ma x
* Vent hole to be opened af ter PCB soldering and cleaning
OPEN TYPE
19.0 ma x
24.0 ma x
AVAILABLE ON REQUEST
l High Temperature winding wire
l Special coil resistance & pick-up
l Resistor / Diode across coil
l For other custom solutions consult factory




 3572-1A-xx-x-xx-xx
DATA ON VARIOUS TESTS CONDUCTED FOR OPERATING CONDITIONS*
TEST
TEST CONDITION
RESULT
Relay kept at 1000C
Coil Voltage : 14 VDC
Continuous Energisation test at
Ex treme temperature Conditions
Load given : 30 A @ 12 VDC
Duration : 5 Sec. On, 5 Sec. OFF
Relays successfully completed
100000 operations at given load
No. of operation : 50000
The above test repeated at - 300C for 50000
operations
Thermal cycling
Relay subjected to :-
-300C to + 1000C in 2 Hrs. with coil ON
+1000C for 2 Hrs. with coil ON
+1000C to - 300C in 2 Hrs. with 1 Hrs. Coil ON &
1 Hrs. Coil OFF
-300C for t wo Hrs. with Coil ON
No. of Cycles : 3
All operating parameters within
the specifications af ter test
Shock Voltage
Relay is subjected to :-
Ma x. Voltage : 100VDC
Shock Wave : Exponential Damping vibration
Time : 500 micro Sec.
Period : 30 Sec.
Test Time : 10 Hrs.
Af ter the test, all operating parameters
of the relay are within specification.
Dropping Impact
www.DataSheet4U.com
Relays dropped from a height of 1 Meter to a
concrete floor
No change in operating
parameters of the relay.
Jump Start
24 VDC for 1 minute conducting nominal current
at 230C
Withstood successfully
Corrosion Resistance
5% Sodium Chloride solution
applied to relay for 48 Hrs.
No damage to relay parts
Water Resistance test
IP 67 (For Sealed Version)
*Typical values for relays with 12 VDC coil. For higher severity please consult factory



Recommended third-party 3572-1A-xx-x-xx-xx Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)