Document
MINIATURE POWER RELAY
• • • • • •
58
International Standard Foot Print Compact High Performance High Capacity Dust Protected / Sealed Version CSA Certified (File No. 106405-1) Suitable DIN Rail and PCB Sockets Available
SPECIFICATIONS
Nominal Voltage VDC
Contact Arrangement : I Form A, I Form C, I Form A/ I Form C (K type) 2 Form C Contact Material Contact Rating Rated Voltage Maximum Voltage Maximum Continuous Current at 230VAC/24VDC 1 Form A (K type) 1 Form C (K type) 1 Form C (Std) 2 Form C Maximum Power Rating AC Voltage (1CK/1C/2C) Nominal Coil Power Operating Power Life Expectancy Mechanical Electrical Contact Resistance(Initial) : 10 operations : 10 operations at rated load : 100 milli Ohms
5 6
COIL DATA
Coil Resistance at 200C Ohms ± 10% Drop-out Voltage VDC (Min) Pick-up Voltage VDC (Max) 58
Product Series
HOW TO ORDER
12 - 1C E - XXX
: Silver Alloy : 230 VAC/28 VDC : 440 VAC/220 VDC
Specialities if any Nil - Dust Protected E - Sealed 1A 1C 1AK 1CK 2C 1 FORM A (10A) 1 FORM C (10A) 1 FORM A (16A) 1 FORM C(C10/16A) 2 FORM C (5A)
Coil Voltage (Refer coil data)
: 16 A : 10A (NC) / 16A (NO) : 10A : 5A : 3680/2500/1150 VA : 0.5W (approx) : 0.32W (approx)
5 6 9 12 18 24 48
4.00 4.80 7.20 9.60 14.40 19.20 38.40
0.5 0.6 0.9 1.2 1.8 2.4 4.8
50 72 160 285 640 1150 3300
CIRCUIT DIAGRAMS
DRILLING PATTERN
1AK
1 Form A (K type)
1 Form C (K type)
1 Form C (Std)
2 Form C
Limiting Curve for Power Load
50
1C
Contact Current (A)
3.5
10 5
1C
AC
www.DataSheet4U.com Dielectric Strength
Between Open Contacts & Coil Between Open Contacts Insulation Resistance : 5000 VRMS : 750 VRMS : 500 Meg.Ohms at 500VDC,25 C,RH50 Operate time at Nominal Voltage Release time at Nominal Voltage Ambient Temperature Weight : 18 milli sec.(Typ) : 8 milli sec.(Typ) : –40 C to +70 C : 18 gms (approx)
0 0 0
2C
1 0.5
DC
2C/1CK
0.1
10
20 30 40 50
100
200
300 400 500
Contact Voltage(V)
DIMENSIONS
29.0
12.5
Typical applications Industrial Electronics, PLCs, Timers, Automation, UPS, Home Appliances. Office
All dimensions are in mm. Specifications subject to change without notice. Tolerance unless otherwise specified is ± 10%
3.5
24.5
For Suitable Sockets Refer Socket Section
7.5
.