High-Frequency SPDT Switch
High-Frequency SPDT Switch
CXG1199UR
Description
The CXG1199UR is a SPDT (Single Pole Dual Throw) switch and suitable f...
Description
High-Frequency SPDT Switch
CXG1199UR
Description
The CXG1199UR is a SPDT (Single Pole Dual Throw) switch and suitable for middle power wireless communication systems, for example, cellular phones, Bluetooth and WLAN. Low insertion loss is realized by the Sony JPHEMT process. (Applications: Cellular phones, Bluetooth and WLAN)
Features
Low insertion loss
Package
Small package: 12-pin UQFN (2.0mm × 2.0mm × 0.6mm (Max.))
Structure
GaAs JPHEMT MMIC
Absolute Maximum Ratings
www.DataSheet4U.com
(Ta = 25°C) Control voltage Operating temperature Storage temperature Vctl Topr 5 –35 to +85 –40 to +85 Tstg –65 to +150 V
°C °C °C
(for general use) (for Bluetooth & WLAN)
This IC is ESD sensitive device. Special handling precautions are required. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E05X11-PS
CXG1199UR
Block Diagram and Recommended Circuit
RF1
GND CRF
GND
6
5
4
GND
7
3
GND
F1 RF2 CRF F3 8
F2 2 CRF F4 RF3
GND
9
1
GND
10 Cbypass (100pF)
11
12 Cbypass (100pF) Rctl (1kΩ)
Rctl (1kΩ)
CTLA
GND
CTLB
When using this IC, the following external components are needed: Rctl: This resistor is for improving ESD pe...
Similar Datasheet