ST333CPbF Series
Vishay High Power Products
Inverter Grade Thyristors (Hockey PUK Version), 720 A
FEATURES
• • • • • • • • • • • Metal case with ceramic insulator All diffused design Center amplifying gate Guaranteed high dv/dt Guaranteed high di/dt International standard case TO-200AB (E-PUK) High surge current capability Low thermal impedance High speed performance Lead (Pb)-free Designed and qualified for industrial level
RoHS
COMPLIANT
TO-200AB (E-PUK)
PRODUCT SUMMARY
IT(AV) 720 A
TYPICAL APPLICATIONS
• • • • Inverters Choppers Induction heating All types of force-commutated converters
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER IT(AV) TEST CONDITIONS VALUES 720 Ths 55 1435 Ths 50 Hz 60 Hz 50 Hz 60 Hz 25 11 000 11 500 605 553 400 to 800 Range 10 to 30 - 40 to 125 UNITS A °C A °C A
IT(RMS) ITSM www.DataSheet4U.com I2 t VDRM/VRRM tq TJ
kA2s V µs °C
ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS
TYPE NUMBER VOLTAGE CODE 04 08 VDRM/VRRM, MAXIMUM REPETITIVE PEAK VOLTAGE V 400 800 VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 500 900 IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 50
ST333C..C
Document Number: 94376 Revision: 30-Apr-08
For technical questions, contact:
[email protected]
www.vishay.com 1
ST333CPbF Series
Vishay High Power Products
Inverter Grade Thyristors (Hockey PUK Version), 720 A
CURRENT CARRYING CAPABILITY
ITM 180° el 180° el ITM 100 µs ITM
FREQUENCY
UNITS
50 Hz 400 Hz 1000 Hz 2500 Hz Recovery voltage VR Voltage before turn-on VD Rise of on-state current dI/dt Heatsink temperature Equivalent values for RC circuit
1630 1630 1350 720 50 VDRM 50 40 10/0.47
1420 1390 1090 550
2520 2670 2440 1450 50 VDRM -
2260 2330 2120 1220
7610 4080 2420 1230 50 VDRM -
6820 3600 2100 1027 V A/µs 55 10/0.47 °C Ω/µF A
55
40 10/0.47
55
40
ON-STATE CONDUCTION
PARAMETER Maximum average on-state current at heatsink temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180° conduction, half sine wave double side (single side) cooled DC at 25 °C heatsink temperature double side cooled t = 10 ms Maximum peak, one half cycle, non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 mls No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 720 (350) 55 (75) 1435 11 000 11 500 9250 Sinusoidal half wave, initial TJ = TJ maximum 9700 605 553 428 391 6050 1.96 0.91 0.93 0.58 0.58 600 1000 mΩ V kA2√s kA2s A UNITS A °C
www.DataSheet4U.com Maximum I2t for fusing
I2t
t = 8.3 ms t = 10 ms t = 8.3 ms
Maximum
I2√t
for fusing
I2√t VTM VT(TO)1 VT(TO)2 rt1 rt2 IH IL
t = 0.1 to 10 ms, no voltage reapplied ITM = 1810 A, TJ = TJ maximum, tp = 10 ms sine wave pulse (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum TJ = 25 °C, IT > 30 A TJ = 25 °C, VA = 12 V, Ra = 6 Ω, IG = 1 A
Maximum peak on-state voltage Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum holding current Typical latching current
mA
www.vishay.com 2
For technical questions, contact:
[email protected]
Document Number: 94376 Revision: 30-Apr-08
ST333CPbF Series
Inverter Grade Thyristors Vishay High Power Products (Hockey PUK Version), 720 A
SWITCHING
PARAMETER Maximum non-repetitive rate of rise of turned on current Typical delay time minimum Maximum turn-off time maximum tq SYMBOL dI/dt td TEST CONDITIONS TJ = TJ maximum, VDRM = Rated VDRM ITM = 2 x dI/dt TJ = 25 °C, VDM = Rated VDRM, ITM = 50 A DC, tp = 1 µs Resistive load, gate pulse: 10 V, 5 Ω source TJ = TJ maximum, ITM = 550 A, commutating dI/dt = 40 A/µs VR = 50 V, tp = 500 µs, dV/dt: See table in device code VALUES 1000 1.1 10 30 µs UNITS A/µs
BLOCKING
PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt IRRM, IDRM TEST CONDITIONS TJ = TJ maximum, linear to 80 % VDRM, higher value available on request TJ = TJ maximum, rated VDRM/VRRM applied VALUES 500 50 UNITS V/µs mA
TRIGGERING
PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage Maximum DC gate currrent required to trigger Maximum DC gate voltage required to trigger Maximum DC gate current not to trigger Maximum DC gate voltage not to trigger www.DataSheet4U.com SYMBOL PGM PG(AV) IGM + VGM - VGM IGT VGT IGD VGD TJ = 25 °C, VA = 12 V, Ra = 6 Ω TJ = TJ maximum, tp ≤ 5 ms TEST CONDITIONS TJ = TJ maximum, f = 50 Hz, d% = 50 VALUES 60 10 10 20 5 200 3 20 0.25 UNITS W A V mA V mA V
TJ = TJ maximum, rated VDRM applied
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink SYMBOL TJ TStg RthJ-hs DC opera.