Serially-Controlled Octal SPST Switches
Data Sheet
9.5 Ω RON, ±15 V/+12 V/±5 V iCMOS, Serially-Controlled Octal SPST Switches
ADG1414
FEATURES
SPI interface S...
Description
Data Sheet
9.5 Ω RON, ±15 V/+12 V/±5 V iCMOS, Serially-Controlled Octal SPST Switches
ADG1414
FEATURES
SPI interface Supports daisy-chain mode 9.5 Ω on resistance at 25°C and ±15 V dual supply 1.6 Ω on-resistance flatness at 25°C and ±15 V dual supply Fully specified at ±15 V, +12 V, ±5 V 3 V logic-compatible inputs Rail-to-rail operation 24-lead TSSOP and 24-lead, 4 mm × 4 mm LFCSP
APPLICATIONS
Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Audio signal routing Video signal routing Communication systems
GENERAL DESCRIPTION
The ADG1414 is a monolithic complementary metal-oxide semiconductor (CMOS) device containing eight independently selectable switches designed on an industrial CMOS (iCMOS®) process. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar technologies. iCMOS components can tolerate high supply voltages while providing increased performance, dramatically lower power consumption, and reduce the package size.
The ADG1414 is a set of octal, single-pole, single-throw (SPST) switches controlled via a 3-wire serial interface. On resistance is matched closely between switches and is very flat over the full signal range. Each switch conducts equally well in both directions and the input signal range extends to the supplies.
Data is written to these devices in the form of eight bits; each bit corresponds to one channel.
FUNCTIONAL BLOCK DIAGRAM
ADG1414
S1 D1 S2 D2 S3 D3 S4 D4 S5 D5 S6 D6 S...
Similar Datasheet