SC622
LED Light Management Unit
POWER MANAGEMENT Features
Charge Pump, 400mA Flash LED, Dual LD...
SC622
LED Light Management Unit
POWER MANAGEMENT Features
Charge Pump, 400mA Flash LED, Dual LDOs, and SemWireTM Interface Description
The SC622 is a high efficiency charge pump LED driver using Semtech’s proprietary mAhXLifeTM technology. Performance is optimized for use in single-cell Li-ion battery applications. The charge pump provides continuous or bursted current to a flash LED using a dedicated flash driver current sink. The load and supply conditions determine whether the charge pump operates in 1x, 1.5x, or 2x mode. A flashtimeout feature disables the flash if active for longer than 1 second. The SC622 also provides two low-dropout, lownoise linear
regulators for powering a camera module or other peripheral circuits. The SC622 uses the proprietary SemWireTM single wire interface. The interface controls all functions of the device, including flash current and two LDO voltage outputs. The single wire implementation minimizes microcontroller and interface pin counts. The flash/spotlight output is triggered via either the SemWire interface or a dedicated pin. In sleep mode, the device reduces quiescent current to 100μA while continuing to monitor the serial interface. The two LDOs can be enabled when the device is in sleep mode. Total current reduces to 0.1μA in shutdown.
Input supply voltage range — 3.0V to 5.5V Charge pump modes — 1x, 1.5x and 2x Flash LED — 400mA max in flash mode, 250mA max continuous for spotlight Two user-configurable 100m...