SC627A
LED Light Management Unit
POWER MANAGEMENT Features
Charge Pump, 4 LEDs, 700mA F...
SC627A
LED Light Management Unit
POWER MANAGEMENT Features
Charge Pump, 4 LEDs, 700mA Flash LED, Dual LDOs, and I2C Interface Description
The SC627A is a high efficiency charge pump LED driver using Semtech’s proprietary mAhXLifeTM technology. Performance is optimized for use in single-cell Li-ion battery applications. The charge pump provides backlight current in conjunction with four matched current sinks. It also can supply continuous or bursted current to a flash LED using the dedicated flash driver current sink. The load and supply conditions determine whether the charge pump operates in 1x, 1.5x, or 2x mode. An optional fading feature that gradually adjusts the backlight current is provided to simplify control software. A flash-timeout feature disables the flash if active for longer than 1 second. The SC627A also provides two low-dropout, low-noise linear
regulators for powering a camera module or other peripheral circuits. The SC627A uses an I2C compatible serial interface. The interface controls all functions of the device, including backlight and flash currents as well as two LDO voltage outputs. The flash/spotlight output is triggered via either the I2C interface or a dedicated pin. In sleep mode, the device reduces quiescent current to 100μA while continuing to monitor the serial interface. The two LDOs can be enabled when the device is in sleep mode. Total current reduces to 0.1μA in shutdown.
Input supply voltage range — 3.0V to ...