Class-D audio amplifer
TDA8932B
Class-D audio amplifier
Rev. 02 — 29 March 2007 Preliminary data sheet
1. General description
The TDA8932B is a...
Description
TDA8932B
Class-D audio amplifier
Rev. 02 — 29 March 2007 Preliminary data sheet
1. General description
The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 Ω) or 1 × 30 W in mono full-bridge application (RL = 8 Ω). Due to the low power dissipation the device can be used without any external heat sink when playing music. Due to the implementation of thermal foldback, even for high supply voltages and/or lower load impedances, the device remains operating with considerable music output power without the need for an external heat sink. The device has two full-differential inputs driving two independent outputs. It can be used as mono full-bridge configuration (BTL) or as stereo half-bridge configuration (SE).
2. Features
Operating voltage from 10 V to 36 V asymmetrical or ±5 V to ±18 V symmetrical Mono-bridged tied load (full-bridge) or stereo single-ended (half-bridge) application Application without heatsink using thermally enhanced small outline package High efficiency and low-power dissipation Thermally protected and thermal foldback Current limiting to avoid audio holes Full short-circuit proof across load and to supply lines (using advanced current protection) I Switchable internal or external oscillator (master-slave setting) I No pop noise I Full-differential inputs I I I I I I I
www.DataSheet4U.com
3. Applications
I I I I I I Flat panel television sets Flat pa...
Similar Datasheet