AH174
Inverted Output Hall Effect Latch For High Temperature Features
- Bipolar Hall effect latch sensor - 3.5V to 20V...
AH174
Inverted Output Hall Effect Latch For High Temperature Features
- Bipolar Hall effect latch sensor - 3.5V to 20V DC operation voltage - Open collector pre-driver - 25mA output sink current - Chip power reverse-connection protection - Operating temperature: −40°C ~ +125°C - Package: SIP3, SOT23
General Description
AH174 is a single-digital-output Hall-effect sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an open-collector output pre-driver. An internal bandgap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. While the magnetic flux density (B) is larger than threshold Bop, the OUT pin turns off (High). If B removed toward Brp, the OUT pin is latched “off” state prior to B < Brp. When B < Brp, the OUT pin go into “ on ” state.
Applications
- Rotor position sensing - Current switch - Encoder - RPM detection
Pin Assignment
(Top view)
3. OUT 2. GND 1. VCC (SIP3 package)
Pin Descriptions
Name Description
VCC GND
OUT
Input power Ground Inverted output stage
www.DataSheet4U.com
3. OUT GND 2. 1. VCC ( SOT23 package)
Ordering Information
AH174 X - X X X - X
Wafer Body Blank or A~Z : if necessary to specify
Package P: SIP3 W: SOT23
Lead L : Lead Free Blank: Normal
Packing Blank : Tube A : Taping
M...