AE618

E-pHEMT MMIC Product Features Small size Higher Gain Higher linearity SOIC-8 SMD Type package Higher productivity Lower manufacturing cost -73dBc CSO 79 Channels @ +39dBmV/ch -68dBc CTB 79 Channels @ +39dBmV/ch -64dBc XMD 79 Channels @ +39dBmV/ch Low Noise Figure AE618 (Preliminary) Application Low Noise Amplifier for CATV, Satellite Cable Modem FTTH (G-PON, GE-PON) Optical node Package : SOIC-8 Description AE618 is designed as low cost drive amplifiers for many applications including FTTH, CATV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise. The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet. Specifications PARAMETER Frequency Gain Input Return Loss Output Return Loss Output IP3 1dB Compression Point Noise Figure CSO www.DataSheet4U.com UNIT MHz dB dB dB dBm dBm dB dBc MIN TYP 50 ~ 1000 MAX Condition 19 20.8 -11 -11 38 28 41 30.8 2.1 -73 -68 -64 470 3.5 -68 -63 -59 At 500MHz/10dBm 2tone At 500MHz 79 channel, +39dBmV/ch 79 channel, +39dBmV/ch 79 channel, +39dBmV/ch Vdd = 8.0V CTB 30 ~ 870MHz dBc dBc XMOD DC Current NOTE mA 1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25℃, Vdd=8V, 75Ω system 2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 500MHz Absolute Minimum and Maximum Ratings PARAMETER Device Voltage Operating Temperature Storage Te...