DatasheetsPDF.com

APT90DR160HJ Dataheets PDF



Part Number APT90DR160HJ
Manufacturers Microsemi
Logo Microsemi
Description Standard Rectifier Diode FULL BRIDGE
Datasheet APT90DR160HJ DatasheetAPT90DR160HJ Datasheet (PDF)

APT90DR160HJ ISOTOP® Rectifier diode full bridge Power Module VRRM = 1600V IF = 90A @ Tc = 80°C Application • Input mains rectifier Features • • • • • • • Planar double passivated chips High blocking voltage High current Low leakage current Very low stray inductance High level of integration ISOTOP® Package (SOT-227) Benefits ~ ~ www.DataSheet4U.com + • • • • • • - Outstanding performance at high frequency operation Low losses Low noise switching Direct mounting to heatsink (isolated pa.

  APT90DR160HJ   APT90DR160HJ



Document
APT90DR160HJ ISOTOP® Rectifier diode full bridge Power Module VRRM = 1600V IF = 90A @ Tc = 80°C Application • Input mains rectifier Features • • • • • • • Planar double passivated chips High blocking voltage High current Low leakage current Very low stray inductance High level of integration ISOTOP® Package (SOT-227) Benefits ~ ~ www.DataSheet4U.com + • • • • • • - Outstanding performance at high frequency operation Low losses Low noise switching Direct mounting to heatsink (isolated package) Low junction to case thermal resistance RoHS Compliant Absolute maximum ratings Symbol VR VRRM IF IFSM Parameter Maximum DC reverse Voltage Maximum Peak Repetitive Reverse Voltage DC Forward Current Non-Repetitive Forward Surge Current Max ratings 1600 t=10ms TC = 90°C TJ = 45°C 80 850 Unit V APT90DR160HJ – Rev 0 November, 2009 A These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-3 APT90DR160HJ All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic IR VF VT rT Reverse Current Forward Voltage On – state Voltage On – state Slope resistance Test Conditions VR = 1600V IF = 90A Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Min Typ 50 4 1.3 1.1 0.8 4.8 Max Unit µA mA V V mΩ Thermal and package characteristics Symbol RthJC RthJA VISOL TJ,TSTG TL Torque Wt Characteristic Junction to Case Thermal resistance Junction to Ambient RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Min Typ Max 0.85 20 150 300 1.5 Unit °C/W V °C N.m g Storage Temperature Range Max Lead Temp for Soldering:0.063” from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -55 29.2 SOT-227 (ISOTOP®) Package Outline 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) r = 4.0 (.157) (2 places) www.DataSheet4U.com 4.0 (.157) 4.2 (.165) (2 places) 0.75 (.030) 0.85 (.033) 25.2 (0.992) 25.4 (1.000) 3.30 (.130) 12.6 (.496) 4.57 (.180) 12.8 (.504) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) 1.95 (.077) 2.14 (.084) Dimensions in Millimeters and (Inches) www.microsemi.com 2-3 APT90DR160HJ – Rev 0 November, 2009 APT90DR160HJ Typical Performance Curve Forward Characteristic 180 150 IFSM (A) 120 IF (A) 90 60 TJ=25°C TJ=125°C Non-Repetitive Forward Surge Current 1000 800 600 400 200 0 0.01 t (s) TJ=125°C TJ=45°C 30 0 0.0 0.4 0.8 VF (V) 1.2 1.6 2.0 50Hz 80% VRRM 0.1 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 1 Thermal Impedance (°C/W) 0.8 0.6 0.4 0.3 0.2 0.1 Single Pulse 0.0001 0.001 0.01 0.1 1 10 0.9 0.7 0.5 0.05 0 0.00001 Rectangular Pulse Duration in Seconds www.DataSheet4U.com ISOTOP® is a registered trad.


APT40DR160HJ APT90DR160HJ APT30DF20HJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)