I&Q NETWORKS
IQF-25L Series
I&Q NETWORKS
1.5 to 3 GHz / 10 % Bandwidth / In-Circuit, Voltage Controlled Phase Balance / Hi-Rel Herm...
Description
IQF-25L Series
I&Q NETWORKS
1.5 to 3 GHz / 10 % Bandwidth / In-Circuit, Voltage Controlled Phase Balance / Hi-Rel Hermetic Pkg
PRINCIPAL SPECIFICATIONS
Model Number IQF-25L-***B LO Frequency, fo, MHz 1500 - 3000
†
Bandwidth RF Input 10% of fo
For complete Model Number replace *** with desired LO Frequency in MHz.
GENERAL SPECIFICATIONS
RF and LO Input Characteristics Impedance: 50 Ω nom. VSWR: 1.5:1 max. RF Power Level: 0 dBm nom. LO Power Level: +10 dBm nom. I & Q Output Characteristics Video Bandwidth, nom: DC to †100 MHz Output Impedance: 50 Ω nom. Conversion Loss (RF to I or Q): 10 dB typ., 12 dB max. IF Balance (I to Q) Phase, @ Vc=+5V: 90° ± 5° Bias Control: 0 to +15V Phase Tuning Range: ±10° nom., @ fo Tuning Sensitivity: 4°/V nom. Temperature Stability: ±1° nom.,±2° max. Amplitude: 0.2 dB max. Weight, nominal 0.55 oz (15.4 g) Operating Temp: -- 55° to +85°C
†
L - Package Outline
www.DataSheet4U.com
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Dimensions marked with * apply only at body. 4. All unmarked pins are case ground.
LO Input Not Used Phase Adjust I Output RF Input Q Output
RF and Video Bandwidths are typically much greater than specified.
General Notes: 1. I & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed RF and LO signals. 2. The IQF-25L series features an in-circuit, voltage controlled phase balance that allows fine adjustm...
Similar Datasheet