OC22E5S Volts Datasheet

OC22E5S Datasheet, PDF, Equivalent


Part Number

OC22E5S

Description

SC-Cut Crystal - Sine Wave - 5.0 Volts

Manufacture

EUROQUARTZ

Total Page 1 Pages
Datasheet
Download OC22E5S Datasheet


OC22E5S
EURO QUARTZ
OCXO - OC22E5S SERIES
SC-Cut Crystal - Sine Wave - 5.0 Volts
Frequency Range 5.0MHz to 20.0MHz
50.8 x 50.8 x 16.0mm 7 pin metal, solder-sealed package
Supply Voltage 5.0 Volts
SC-Cut Crystal
Sine Wave Output
· EFC (Voltage control) as standard
DESCRIPTION
OC22E5S series oven-controlled crystal oscillators are close tolerance
OCXOs with excellent phase noise performance.
OUTLINE & DIMENSIONS
SPECIFICATION
Crystal Cut:
Output Waveform:
Supply Voltage:
Frequency Range:
Initial Calibration Tolerance:
Frequency Stability
over 0° to +60°C:
over -20° to +70°C:
over -40° to +85°C:
vs. Voltage Change:
vs. Ageing:
vs. Load Change:
Warm-up Time:
Voltage Control
Control Voltage Centre:
Freq. Deviation Range:
Control Voltage Range:
Transfer Function:
www.DataSIhnepeutt4IUm.cpoemdance:
EFC Linearity:
Power Dissipation:
Output
Output level:
Harmonics:
Spurious:
Reference Voltage:
Envionmental
Storage Temperature:
Shock:
Vibration:
PHASE NOISE (at 10MHz)
Offset
1Hz
10Hz
100Hz
1kHz
10kHz
dBc/Hz
-85
-120
-140
-145
-150
SC-cut
Sine Wave
+5.0 VDC ±0.2V
5.0MHz to 20.0MHz
±0.1ppm max.(at VCON +2.5V)
±0.01ppm
±0.02ppm
±0.03ppm
<±1.0ppb for ±5% change
±0.5ppb max per day
±50ppb per first year
±150ppb over 10 years
<±1.0ppb for ±5% change
5 minutes max. to within
±10ppb of nominal freq.
TEST CIRCUIT
+2.5 Volts (VCON)
±0.5ppm min., ±1ppm max.
ref. to 25°C and O.T.R.
2.5V ±2.0Volts
Positive: Increasing control
voltage increases output
frequency
100k minimum
±10% maximum
2.0W max. steady state
6.0W max. at turn on
+2dBm typ., +8dBm max
into 50W load
-30dBc min.
-75dBc min.
+4.0±0.3VDC or custom
-55° to +125°C
2000g, 0.3ms ½ sine
10 ~2000Hz / 10g
Squarewave = 15pF
Sine Wave = 50W
Including probe and fixture
PART NUMBER FORMAT
Example:
OC22GE5S-10.000-0.10/-20+70
OCXO Package: OC22
RoHS Compliance
G: RoHS Compliant
Blank: Non-compliant
E: Output Sine Wave
5: Supply Voltage 5.0Volts
S: SC-Cut Crystal
Nominal Frequency 10.0MHz
Stability in ±ppm
Operating Temperature Range °C
Lowest Temperature/Highest Temperature
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk


Features EURO QUARTZ Frequency Range 5.0MHz to 20 .0MHz 50.8 x 50.8 x 16.0mm 7 pin metal, solder-sealed package Supply Voltage 5 .0 Volts SC-Cut Crystal Sine Wave Outpu t EFC (Voltage control) as standard OC XO - OC22E5S SERIES SC-Cut Crystal - Si ne Wave - 5.0 Volts · OUTLINE & DIME NSIONS DESCRIPTION OC22E5S series oven- controlled crystal oscillators are clos e tolerance OCXOs with excellent phase noise performance. SPECIFICATION Cryst al Cut: Output Waveform: Supply Voltage : Frequency Range: Initial Calibration Tolerance: Frequency Stability over 0° to +60°C: over -20° to +70°C: over -40° to +85°C: vs. Voltage Change: vs . Ageing: SC-cut Sine Wave +5.0 VDC ±0 .2V 5.0MHz to 20.0MHz ±0.1ppm max.(at VCON +2.5V) ±0.01ppm ±0.02ppm ±0.03p pm <±1.0ppb for ±5% change ±0.5ppb m ax per day ±50ppb per first year ±150 ppb over 10 years <±1.0ppb for ±5% ch ange 5 minutes max. to within ±10ppb o f nominal freq. vs. Load Change: Warm- up Time: TEST CIRCUIT Voltage Control Control Voltage Centre: Freq. Deviation Ran.
Keywords OC22E5S, datasheet, pdf, EUROQUARTZ, SC-Cut, Crystal, -, Sine, Wave, -, 5.0, Volts, C22E5S, 22E5S, 2E5S, OC22E5, OC22E, OC22, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)