OC22T5A Volts Datasheet

OC22T5A Datasheet, PDF, Equivalent


Part Number

OC22T5A

Description

AT-Cut Crystal - Square Wave - 5.0 Volts

Manufacture

EUROQUARTZ

Total Page 1 Pages
Datasheet
Download OC22T5A Datasheet


OC22T5A
EURO QUARTZ
OCXO - OC22T5A SERIES
AT-Cut Crystal - Square Wave - 5.0 Volts
Frequency Range 5.0MHz to 20.0MHz
50.8 x 50.8 x 16.0mm 7 pin metal, solder-sealed package
Supply Voltage 5.0 Volts
AT-Cut Crystal
Squarewave Output
· EFC (Voltage control) as standard
DESCRIPTION
OC22T5A series oven-controlled crystal oscillators are close tolerance
OCXOs with good phase noise performance.
OUTLINE & DIMENSIONS
SPECIFICATION
Crystal Cut:
Output Waveform:
Supply Voltage:
Frequency Range:
Initial Calibration Tolerance:
Frequency Stability
over 0° to +60°C:
over -20° to +70°C:
over -40° to +85°C:
vs. Voltage Change:
vs. Ageing:
vs. Load Change:
Warm-up Time:
Voltage Control
Control Voltage Centre:
Freq. Deviation Range:
Control Voltage Range:
Transfer Function:
www.DataSIhnepeutt4IUm.cpoemdance:
EFC Linearity:
Power Dissipation:
Output
Load:
Output Logic HIGH:
Output Logic LOW:
Duty Cycle:
Rise/Fall Time:
Reference Voltage:
Envionmental
Storage Temperature:
Shock:
Vibration:
PHASE NOISE (at 10MHz)
Offset
1Hz
10Hz
100Hz
1kHz
10kHz
dBc/Hz
-75
-100
-130
-140
-150
AT-cut
Square Wave
+5.0 VDC ±0.2V
5.0MHz to 20.0MHz
±0.1ppm max.(at VCON +2.5V)
±0.05ppm
±0.1ppm
±0.2ppm
<±1.0ppb for ±5% change
±3.0ppb max per day
±0.5ppm per first year
±3.0ppm over 10 years
<±1.0ppb for ±5% change
1 minutes max. to within
±0.2ppm of nominal freq.
TEST CIRCUIT
+2.5 Volts (VCON)
±5.0ppm min., ±20ppm max.
ref. to 25°C and O.T.R.
2.5V ±2.0Volts
Positive: Increasing control
voltage increases output
frequency
100k minimum
±10% maximum
2.0W max. steady state
6.0W max. at turn on
15pF HCMOS
+4.5V minimum
0.5V maximum
50%±10%
5ns max (20%~80%)
Frequency dependant
+4.0±0.3VDC or custom
-55° to +125°C
2000g, 0.3ms ½ sine
10 ~2000Hz / 10g
Squarewave = 15pF
Sine Wave = 50W
Including probe and fixture
PART NUMBER FORMAT
Example:
OC22GT5A-10.000-0.10/-20+70
OCXO Package: OC22
RoHS Compliance
G: RoHS Compliant
Blank: Non-compliant
T: Output Squarewave
5: Supply Voltage 5.0Volts
A: AT-Cut Crystal
Nominal Frequency 10.0MHz
Stability in ±ppm
Operating Temperature Range °C
Lowest Temperature/Highest Temperature
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk


Features EURO QUARTZ Frequency Range 5.0MHz to 20 .0MHz 50.8 x 50.8 x 16.0mm 7 pin metal, solder-sealed package Supply Voltage 5 .0 Volts AT-Cut Crystal Squarewave Outp ut EFC (Voltage control) as standard O CXO - OC22T5A SERIES AT-Cut Crystal - S quare Wave - 5.0 Volts · OUTLINE & D IMENSIONS DESCRIPTION OC22T5A series ov en-controlled crystal oscillators are c lose tolerance OCXOs with good phase no ise performance. SPECIFICATION Crystal Cut: Output Waveform: Supply Voltage: Frequency Range: Initial Calibration To lerance: Frequency Stability over 0° t o +60°C: over -20° to +70°C: over -4 0° to +85°C: vs. Voltage Change: vs. Ageing: AT-cut Square Wave +5.0 VDC ±0 .2V 5.0MHz to 20.0MHz ±0.1ppm max.(at VCON +2.5V) ±0.05ppm ±0.1ppm ±0.2ppm <±1.0ppb for ±5% change ±3.0ppb max per day ±0.5ppm per first year ±3.0p pm over 10 years <±1.0ppb for ±5% cha nge 1 minutes max. to within ±0.2ppm o f nominal freq. vs. Load Change: Warm- up Time: TEST CIRCUIT Voltage Control Control Voltage Centre: Freq. Deviation Ran.
Keywords OC22T5A, datasheet, pdf, EUROQUARTZ, AT-Cut, Crystal, -, Square, Wave, -, 5.0, Volts, C22T5A, 22T5A, 2T5A, OC22T5, OC22T, OC22, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)