OC22T5S

EURO QUARTZ Frequency Range 5.0MHz to 20.0MHz 50.8 x 50.8 x 16.0mm 7 pin metal, solder-sealed package Supply Voltage 5.0 Volts SC-Cut Crystal Squarewave Output EFC (Voltage control) as standard OCXO - OC22T5S SERIES SC-Cut Crystal - Square Wave - 5.0 Volts · OUTLINE & DIMENSIONS DESCRIPTION OC22T5S series oven-controlled crystal oscillators are close tolerance OCXOs with excellent phase noise performance. SPECIFICATION Crystal Cut: Output Waveform: Supply Voltage: Frequency Range: Initial Calibration Tolerance: Frequency Stability over 0° to +60°C: over -20° to +70°C: over -40° to +85°C: vs. Voltage Change: vs. Ageing: SC-cut Square Wave +5.0 VDC ±0.2V 5.0MHz to 20.0MHz ±0.1ppm max.(at VCON +2.5V) ±0.01ppm ±0.02ppm ±0.03ppm <±1.0ppb for ±5% change ±0.5ppb max per day ±50ppb per first year ±150ppb over 10 years <±1.0ppb for ±5% change 5 minutes max. to within ±10ppb of nominal freq. vs. Load Change: Warm-up Time: TEST CIRCUIT Voltage Control Control Voltage Centre: Freq. Deviation Range: Control Voltage Range: Transfer Function: www.DataSheet4U.com Input Impedance: EFC Linearity: Power Dissipation: Output Load: Output Logic HIGH: Output Logic LOW: Duty Cycle: Rise/Fall Time: Reference Voltage: Envionmental Storage Temperature: Shock: Vibration: PHASE NOISE (at 10MHz) Offset 1Hz 10Hz 100Hz 1kHz 10kHz dBc/Hz -85 -120 -140 -145 -150 +2.5 Volts (VCON) ±0.5ppm min., ±1ppm max. ref. to 25°C and O.T.R. 2.5V ±2.0Volts Positive: Increasing control voltage increases output frequ...