Document
LSM303DLH
Sensor module: 3-axis accelerometer and 3-axis magnetometer
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Analog supply voltage: 2.5 V to 3.3 V Digital supply voltage IOs: 1.8 V Power-down mode 3 magnetic field channels and 3 acceleration channels ±1.3 to ±8,1 gauss magnetic field full-scale ±2 g/±4 g/±8 g dynamically selectable fullscale 16-bit data out I2C serial interface 2 independent programmable interrupt generators for free-fall and motion detection Embedded self-test Accelerometer sleep-to-wakeup function 6D orientation detection ECOPACK® RoHS and “Green” compliant (see Section 10) and a 3D digital magnetic sensor. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are realized using a CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the sensing element characteristics. The LSM303DLH has a linear acceleration full-scale of ±2 g / ±4 g / ±8 g and a magnetic field full-scale of ±1.3 / ±1.9 / ±2.5 / ±4.0 / ±4.7 / ±5,6 / ±8.1 gauss, both fully selectable by the user. The LSM303DLH includes an I2C serial bus interface that supports standard mode (100 kHz) and fast mode (400 kHz). The internal self-test capability allows the user to check the functioning of the whole module in the final application. The system can be configured to generate an interrupt signal by inertial wakeup/free-fall events, as well as by the position of the device itself. Thresholds and timing of interrupt generators are programmable on the fly by the end user. Magnetic and accelerometer parts can be enabled or put in power-down mode separately. The LSM303DLH is available in a plastic land grid array (LGA) package, and is guaranteed to operate over an extended temperature range from -30 to +85 °C. Table 1. Device summary
Temp. range [°C] Package Packing Tray -30 to +85 LSM303DLHTR LGA-28 Tape and reel
LGA-28L (5x5x1.0 mm)
Applications
www.DataSheet4U.com ■ Compensated
■ ■ ■ ■ ■ ■ ■ ■ ■
compassing
Map rotation Position detection Motion-activated functions Free-fall detection Intelligent power-saving for handheld devices Display orientation Gaming and virtual reality input devices Impact recognition and logging Vibration monitoring and compensation
Part number LSM303DLH
Description
The LSM303DLH is a system-in-package featuring a 3D digital linear acceleration sensor
December 2009
Doc ID 16941 Rev 1
1/47
www.st.com 47
Contents
LSM303DLH
Contents
1 Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1 1.2 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2
Module specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1 2.2 2.3 Mechanical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Communication interface characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3.1 2.3.2 Accelerometer sensor I2C - inter IC control interface . . . . . . . . . . . . . . 14 Magnetic field sensing I2C digital interface . . . . . . . . . . . . . . . . . . . . . . 15
3 4
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 4.2 4.3 Linear acceleration sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Zero-g level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Sleep-to-wakeup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5
Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.1 5.2 Factory calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Linear acceleration self-test operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Magnetic self-test operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
www.DataSheet4U.com
5.3
6
Application hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.1 6.2 6.3 6.4 6.5 External capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Pull-up resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Digital interface power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Soldering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 High current wiring effects . . . . . ..