EUP7182 50mA Low-Noise Ultra Low-Dropout CMOS Regulator with Fault Indicator
DESCRIPTION
The EUP7182 low-noise, low-drop...
EUP7182 50mA Low-Noise Ultra Low-Dropout CMOS
Regulator with Fault Indicator
DESCRIPTION
The EUP7182 low-noise, low-dropout, linear
regulator operates from a 2.5V to 5.5V input and is guaranteed to deliver 50mA. The EUP7182 is stable with small 1µF ceramic capacitor. Its performance suits battery powered applications because of its shutdown mode (60 nA typ), low quiescent current (110µA typ), and LDO voltage (110mV typ). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. An output fault-detection circuit indicates loss of regulation. The EUP7182 is available in SOT23-6 package with 1.8V, 2.5v, 2.8V, 3V and 3.3V versions.
FEATURE
z z z z z z z z z z z z z z z 2.5V to 5.5V Input Range 50mA Guaranteed Output Current 60dB PSRR at 1kHz 50µV RMS Output Voltage Noise (10Hz to 100kHz) 110mV Dropout at 50mA Low 110µA No-Load Supply Current ≤ 1µA Shutdown Current Fast Start-up Time Stable With 1µF Ceramic Output Capacitors Thermal Shutdown and Short-Circuit Protection Fault Indicator RoHS Compliant and 100% Lead (Pb)-Free Wireless Handsets Battery Powered Electronics Portable Information Appliances
APPLICATIONS
Block Diagram
www.DataSheet4U.com
Figure1.
DS7182 Ver 1.0 Oct.2007
1
EUP7182
Typical Application Circuit
Figure2. Fixed Voltage LDO
Regulator
Pin Configurations
Package Type Pin Configurations
SOT23-6
www.DataSheet4U.com
Pin Description
PIN PIN DESCRIPTION
VIN GND
1 2
Input voltage of ...