Single General Purpose Voltage Comparator
LM397 Single General Purpose Voltage Comparator
August 2006
LM397 Single General Purpose Voltage Comparator
General De...
Description
LM397 Single General Purpose Voltage Comparator
August 2006
LM397 Single General Purpose Voltage Comparator
General Description
The LM397 is a single voltage comparator with an input common mode that includes ground. The LM397 is designed to operate from a single 5V to 30V power supply or a split power supply. Its low supply current is virtually independent of the magnitude of the supply voltage. The LM397 features an open collector output stage. This allows the connection of an external resistor at the output. The output can directly interface with TTL, CMOS and other logic levels, by tying the resistor to different voltage levels (level translator). The LM397 is available in space saving 5-Pin SOT23 package and pin compatible to TI’s TL331, single differential comparator.
Features
(TA = 25˚C. Typical values unless otherwise specified). n 5-Pin SOT23 package n Industrial operating range −40˚C to +85˚C n Single or dual power supplies n Wide supply voltage range 5V to 30V n Low supply current 300µA n Low input bias current 7nA ± 1nA n Low input offset current ± 2mV n Low input offset voltage n Response time 440ns (50mV overdrive) n Input common mode voltage 0 to VS - 1.5V
Applications
n n n n A/D converters Pulse, square wave generators Peak detector Industrial applications
Connection Diagram
5-Pin SOT23
Typical Circuit
www.DataSheet4U.com
20022108
Top View
20022109
FIGURE 1. Inverting Comparator with Hysteresis
Ordering Information
Package 5-Pin SOT-23 Part Number...
Similar Datasheet