Low Noise Single-Ended to Differential Converter/ADC Driver
Features
n Rail-to-Rail Input and Outputs n Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step n 1.9nV/√Hz Input-Refe...
Description
Features
n Rail-to-Rail Input and Outputs n Fast Settling Time: 240ns, 0.01%, 8VP-P Output Step n 1.9nV/√Hz Input-Referred Op Amp Noise n High Impedance Input n –3dB Bandwidth: 33MHz n 2.7V to 12V Supply Operation n No External Gain Resistors Required n 4.8mA Supply Current n Low Power Shutdown n Low Distortion (HD2/HD3): –102dBc/–97dBc at
100kHz, VOUTDIFF = 4VP-P n Low Offset Voltage: ±400µV Max n High DC Linearity: <±1LSB, 16-Bit, 8VP-P n Low Input Current Noise: 1.1pA/√Hz n 3mm × 3mm 8-Pin DFN and 8-Lead MSOP Packages
Applications
n 16-Bit and 18-Bit SAR ADC Drivers n Single-Ended to Differential Conversion n Differential Line Driver
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents including 5610557, 6344773.
LT6350 Low Noise Single-Ended to Differential Converter/ADC Driver Description
The LT®6350 is a rail-to-rail input and output low noise single-ended to differential converter/ADC driver featuring fast settling time. It converts a high or low impedance, single-ended input signal to a low impedance, balanced, differential output suitable for driving high performance differential succesive approximation register (SAR) ADCs. The two op amp topology features very low noise op amps, that can support SNR >110dB in a 1MHz bandwidth. The input op amp is trimmed for constant low input-referred voltage offse...
Similar Datasheet