NOT RECOMMENDED FOR NEW DESIGN USE AH3774
AH1751
HALL EFFECT LATCH
Description
AH1751 is a single-digital-output Hall-...
NOT RECOMMENDED FOR NEW DESIGN USE AH3774
AH1751
HALL EFFECT LATCH
Description
AH1751 is a single-digital-output Hall-effect sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
While the magnetic flux density (B) is larger than threshold Bop, the OUT pin turns on (low). If B removed toward Brp, the OUT pin is latched “on” state prior to B < Brp. When B < Brp, the OUT pin go into “off ” state.
Features
Bipolar Hall Effect Latch Sensor 3.5V to 20V DC Operation Voltage Open Collector Pre-Driver 50mA Output Sink Current Chip Power Reverse-Connection Protection Operating Temperature: -40°C to 125°C SIP3, SC59 and SC59R (Commonly known as SOT23 in Asia):
Available in “Green” Molding Compound (No Br, Sb) Totally Lead-free & Fully RoHS Compliant (Note 1 & 2 Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
( Top View )
SIP3
3. OUT 2. GND 1. VCC
( Top View )
GND 2.
3. Output 1 . VCC SC59
( Top View )
GND 2.
3. VCC 1 . Output
SC59R
Applications
Rotor Position Sensing Current Switch Encoder RPM Detection
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoH...