HVI10

H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE & DUAL OUTPUT 10 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI10 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range Typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex # 5273. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @230Vac. www.DataSheet4U.com OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 10 watts. Output Connector: Molex # 5273. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-1.5%. Aux. VO2 typ. ±1-2%. (P.R.) Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Input Current: Typ. 0.3A @115Vac, 0.15A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typ. 20mS @115Vac, 80mS @230Vac. Earth leakage: Typ. 0.3mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 65%. Switching Frequency: Typ. 55K Hz at 115Vac. Circuit Topology: Free-running flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/...